Dynamic study of contact damping in martensitic stainless steels using nano-indentation
Related publications (94)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
We propose a minimal model for the response of seedlings to pullout constraints. Central to our approach is the idea of capturing not only average mechanical properties but also the stochastic component of the uprooting process. Our model accounts on one h ...
The tensile elongation of an < 011 > oriented columnar nanocrystalline pure iron structure at a temperature of 300 K has been simulated by molecular dynamics (MD). The simulated sample contains 4.3 x 10(6) atoms and has been subject to free elongation alon ...
Plastic flow is an important mechanism for relaxing stresses that develop due to swelling/shrinkage during charging/discharging of battery materials. Amorphous high-storage capacity Li-Si has lower flow stresses than crystalline materials but there is evid ...
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
Molecular dynamics simulations were performed to study the deformation mechanisms of < 110 >-oriented, faceted Cu and Au nanowires under bending along three different crystallographic directions. Independent of the bending direction, the stress field is ch ...
Al-Zn-Mg(-Cu) (AA7xxx) alloys are widely used structural materials owing to their excellent mechanical properties and low corrosion susceptibility. The high strength of these materials is obtained by the formation of secondary phases, e.g. precipitation. T ...
We report on the diffraction peak shape evolution from cementite particles in three steel microstructures, recorded during in-situ tensile deformation at room temperature. We demonstrate that in a bainitic tempered steel the observed peak broadening and as ...
In unreinforced masonry (URM) structures vertical walls are connected by horizontal spandrel elements. Spandrels have been subjected to extensive damage during earthquakes and are often the first elements within a URM building to crack or fail. If URM buil ...
We investigate the deployment of a thin elastic rod onto a rigid substrate and study the resulting coiling patterns. In our approach, we combine precision model experiments, scaling analyses, and computer simulations toward developing predictive understand ...