Oxygen Evolution Reaction in Ba0.5Sr0.5Co0.8Fe0.2O3-delta Aided by Intrinsic Co/Fe Spinel-Like Surface

Among the perovskites used to catalyze the oxygen evolution reaction (OER), Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) exhibits excellent activity which is thought to be related to dynamic reconstruction at the flexible perovskite surface due to accommodation of large amount of oxygen vacancies. By studying the local structure and chemistry of BSCF surfaces, in detail, via a range of transmission electron microscopy (TEM) methods, we show that the surfaces of the as-synthesized BSCF particles are Co/Fe rich, and remarkably, adopt a spinel-like structure with a reduced valence of Co ions. Post-mortem and identical location TEM analyses reveal that the Co/Fe spinel-like surface retains a stable chemical environment of the Co/Fe ions, although its structure weakens after electrochemical processing. Further, it is verified that prior to the onset of OER, the Co/Fe spinel-like surface promotes the formation of the highly active Co(Fe)OOH phase, which enhances the OER electrocatalytic properties of the underlying conductive BSCF perovskite. This study provides a detailed understanding of the fundamental transformations that oxide catalysts undergo during electrochemical processes and can aid in the development of novel oxide catalysts with enhanced activity.

Electron probing of oxygen-evolving oxide catalysts

Tzu-Hsien Shen

Water splitting is one of the cleanest ways to store energy. The production of hydrogen and oxygen gases can be utilized in fuel cells to generate electricity, power, and heat. In the water splitting process, the oxygen evolution reaction (OER), taking place at the anode, is the sluggish reaction limiting the efficiency. Electrocatalysts are used to reduce the kinetic barrier of OER. Development of high-performance and stable OER catalysts requires fundamental understanding of their electrocatalytic properties and, hence, their holistic characterization is indispensable. The objective of this thesis is to probe Co-based oxide catalysts for OER in an alkaline medium using advanced (scanning) transmission electron microscopy ((S)TEM) techniques. Starting with the surface characterization of a highly active OER oxide catalyst, Ba0.5Sr0.5Co0.8Fe0.2O3-d (BSCF), it is shown that the surfaces of the as-synthesized BSCF particles are Co/Fe rich and adopt a spinel-like structure with a reduced valence of Co ions. The Co/Fe spinel structure is further linked to the formation of the highly active Co(Fe)OOH at the BSCF surface. Further real-time probing of BSCF oxide catalysts using electrochemical liquid-cell TEM shows a switchable wetting behavior of Co-based oxide catalysts by analyzing the liquid movement around oxide particles. The interfacial interactions at the surface-electrolyte under potential cycling are correlated to electrowetting and hydrophilic surface transformation. Molecular oxygen evolution is detected qualitatively under OER conditions by identifying the O2 feature in electron energy-loss spectra. Quantification of the O2 using electron energy-loss spectroscopy is also demonstrated, pending further improvements.The work herein offers new insights into the characterization framework of oxide catalysts for OER using (S)TEM. The bulk to surface structure of the catalysts can be analyzed, and the interfacial interactions of single-particle catalysts can be probed in real-time. The findings aid in understanding the performance and stability of oxygen-evolving oxide catalysts with further prospects envisioned towards a complete quantitative probing of electrocatalytic reactions in real-time. Ultimately, quantitative characterization in electrochemical liquid-phase (S)TEM can provide understanding of surface-active sites and reaction kinetics of oxygen evolution catalysts.

EPFL2022

Electrochemical promotion of Pt catalysts for gas phase reactions

Arnaud Jaccoud

The subject of this work is the study of the electrochemical promotion of catalysis (EPOC), also called non-Faradaic electrochemical modification of catalytic activity (NEMCA). In this phenomenon, application of small currents or potentials on catalysts in contact with solid electrolytes leads to very pronounced strongly non-Faradaic and reversible changes in catalytic activity and selectivity. This work concerns the system composed of platinum film electrodes, deposited on the YSZ electrolyte (ZrO2 doped with 8% Y2O3), in contact with an oxygen containing atmosphere (the O2(g),Pt/YSZ system). The aim of this work was to focus on two points in the phenomenon of EPOC: 1) The nature of the species present on the surface of the catalyst and their impact on the catalytic activity. 2) The phenomenon of permanent promotion of catalysis (P-EPOC), for which the catalytic rate enhancement is not totally reversible, leading to a long lasting activated state. The Pt electrodes were prepared via three different methods (sputtering, thermal decomposition and screen-printing) and, as expected, the resulting microstructure, observed by scanning electron microscopy (SEM), was found to depend greatly on the preparation technique. The electrochemical response of each electrode was characterized by the technique of cyclic voltammetry. Due to the occurrence of different site-related electrochemical reactions, the voltammogram shape was highly influenced by the microstructure of the Pt/YSZ contact. Based on the preliminary studies, the cermet electrode was chosen for additional electrochemical experiments, using chronoamperometry, chronopotentiometry, cyclic voltammetry, steady state polarization and impedance spectroscopy. The results of all these techniques suggest that under anodic polarization, two parallel reactions take place. The first reaction is the oxygen evolution, giving rise to a steady state current under a constant applied potential. The other reaction is the oxygen storage (oxygen injection) in the form of Pt-O species. This second process gives rise to a time dependant current under a constant applied potential, and is therefore responsible for the pseudocapacitive behavior of the electrode. Moreover, linear sweep voltammetry measurements indicated that, by application of an anodic potential, at least three types of Pt-O species were stored, following distinct kinetics. Based on the amount of stored Pt-O and on the corresponding storage kinetics, they were attributed to three different locations on the electrode: 1) at the Pt/YSZ interface, 2) diffusing from the tpb toward the Pt/gas interface, 3) diffusing from the Pt/YSZ interface toward the bulk of the platinum electrode. It has been shown that the Pt film exhibited various activity states toward the catalytic oxidation of ethylene, depending on the oxygen species present at its surface. As evidenced by XPS measurements and in agreement with the thermodynamic data for the given system, the inactive (deactivated) state has been attributed to the formation of surface platinum oxide at T > 550°C. Decreasing the reaction temperature to 525°C caused the slow spontaneous reactivation of the catalyst and several days were necessary to reach the active state, where most of the catalyst was present in its metallic state. The catalyst activity recovery could be accelerated by the application of anodic potential pulses. In agreement with the mechanism of EPOC, this was explained by the oxide destabilizing effect of the anodically produced Oδ- species. Anodic polarization also caused reversible electrochemical promotion of catalysis at unusual high temperature (600°C). In addition, very intriguing catalytic relaxation transients were observed after prolonged anodic polarization times. Indeed, it was found that enhanced catalytic activity could be maintained for up to 10 hours after current interruption. Combination of these latter results, the related literature, the state of the art model of EPOC, and the results obtained by electrochemical techniques led to the proposition of an original model based on the processes of Pt-O storage/release at various locations of the O2(g),Pt/YSZ system. According to this model, anodic polarization produces Oδ- back-spillover species, promoting the catalytic activity, in agreement with the mechanism of EPOC. In parallel, hidden oxygen species are stored at the Pt/YSZ interface and diffuse toward the Pt phase. When the polarization is switched off, these hidden oxygen species diffuse to the gas-exposed surface and cause non-Faradaic promotion, as back-spillover Oδ- do. The large amount of stored charge and its slow diffusion controlled emergence causes the rate enhancement to last for hours.

EPFL2007

Molecular Engineering of Electrode Surfaces for Electrocatalysis

Patrick Eduard Alexa

Electrocatalysts play an important part on the route towards environmental friendly energy sources. They support modern technologies like fuel cells to move further away from the utilization of fossil fuels and the resulting CO2 emission into our atmosphere. The main principle of such energy conversion technologies is to store chemical energy within chemical bonds and to release it as electric energy to fulfill the energy demand of today's society. However energy conversion chemistry in such technologies requires catalysts in order to be effective by providing an alternative reaction pathway that lowers activation energies and maximizes the energy output. Providing suitable catalyst surfaces requires a fundamental knowledge of the interaction of reactants and reaction intermediates with the catalyst surfaces. This concern is addressed in this thesis by fabricating specifically tailored molecular components on metal surfaces, which act as organic/inorganic hybrid electrodes for various energy conversion reactions in electrocatalysis. Characterizing the electrode surface is crucial in order to identify active sites of the catalyst. The molecular structure is investigated by surface sensitive techniques, such as STM and XPS in combination with a home-build transfer system, which enables electrode fabrication in UHV and electrocatalytic experiments in a liquid environment. A detailed characterization of organic polymer components on electrode surfaces is obtained by combining experimental data with MD simulations. The morphology of polymer networks can be successfully mimicked and depending on the chemical composition and the structure, spatial correlations on short length scales are reported. Hybrid electrodes with organic polymer co-catalysts reveal an increased catalytic activity for the HER by providing suitable docking sites that act as catalytic active sites. Reactants and reaction intermediates are stabilized via hydrogen bonding, which results in a higher catalytic turnover. The specific designed structure of the organic co-catalyst helps to identify a fraction of the reaction mechanism and highlights the importance of molecular components in electrocatalysis. The utilization of organic units on electrocatalysts provides also an excellent opportunity in order to use single metal atoms as catalysts. Engineering large pi-systems has no significant impact on the ORR activity, while the distance between active sites and the underlying electrode are crucial for enhancing the catalytic activity. A significant factor in using molecular components in electrocatalysis is the stability of the organics. Using electrografting allows to design organic/inorganic hybrid electrodes with covalent bonds between the molecular component and the metal substrate. Attaching empty porphyrin molecules to substrates introduces a powerful technique in molecular engineering, since empty porphyrin cycles can be metallized with various metal centers that can act as electrocatalysts for different electrochemical reactions. In summary, this thesis provides multiple engineering aspects, which are useful in designing molecular components on metal electrodes for energy conversion. Such hybrid catalyst surfaces are capable of improving the catalytic activity and allow to study the mechanism of catalytic reactions. Implementing organic components provides new routes for tailoring novel materials, which deliver new insight into the complex field of electrocatalysis.

EPFL2020