Seismic Behavior of Pine Flat Concrete Gravity Dam Using Microplane Damage-Plasticity Model
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The paper presents the results of the evaluation of the seismic safety of the Ancien Hôpital de Sion, an important Swiss architectural heritage building, sited in the Canton of Valais, the region with the highest seismic hazard in Switzerland. Three-dimens ...
Although a wealth of knowledge on the behavior of steel moment frame structures has been gained from past experimental studies, there are only a limited number of system-level tests examining seismic response near collapse. Such experimental data is essent ...
International Association of Earthquake Engineering2017
Fling-step and forward directivity, which can impose unexpected seismic demands on structures, are the main consequences of near-fault earthquakes. Although the adverse effect of forward directivity on structures behavior is determined to some level, the i ...
A series of seismic tests were conducted on a 1½-bay by 1½-story special steel moment-resisting frame subassembly from the onset of damage through incipient collapse. These tests were conducted using hybrid simulation with substructuring as a mean to demon ...
Abstract Performance-based earthquake engineering necessitates the development of reliable nonlinear analysis models that are able to simulate the behavior of structures from the onset of damage through collapse. These models provide engineering demand par ...
Reinforced concrete (RC) walls are frequently used as lateral stiffness and strength-providing members in RC buildings. If well detailed and designed according to capacity design rules, RC walls can lead to a very robust behavior and stable cyclic response ...
Braced frames are often used to resist lateral earthquake loads in steel buildings, but braces can interfere with architectural features. Eccentrically braced frames (EBFs) will accommodate windows, doors, and halls, but have performance limitations when l ...
The reliable estimation of the seismic performance of structures requires quantifying the aleatory and epistemic uncertainties of the system parameters. This is efficiently achieved for a case study of a four-story steel moment-resisting frame through seve ...
This paper evaluates the effectiveness of single and multi-mode nonlinear static procedures (NSPs) as well as the FEMA P58 simplified approach versus rigorous nonlinear response history analyses (NRHA) for estimating seismic demands of steel special moment ...
Unreinforced masonry (URM) structures are known to be rather vulnerable to seismic loading. Modern URM buildings with reinforced concrete (RC) slabs might, however, have an acceptable seismic performance for regions of low to moderate seismicity. In partic ...
