Functionalized Fiber Reinforced Composites via Thermally Drawn Multifunctional Fiber Sensors
Related publications (34)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The behaviour of brittle matrix fibre reinforced-composites is dependent of the properties of its constituents (fibre, matrix and fibre-matrix interface) and is affected by the mechanical and environmental loads. The fracture of a unidirectional composite ...
As the range of applications for fiber-reinforced polymer (FRP) composite materials in civil engineering constantly increases, there is more and more concern with regard to their performance in critical environments. The fire behavior of composite material ...
Satisfactory impregnation of glass fiber mats may be obtained with isotactic polypropylene/montmorillonite (MMT) nanocomposites under conditions comparable with industrial conditions. However, it is demonstrated here that the high melt viscosity of the nan ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Electrical resistance in carbon-fiber reinforced polymers has been shown experimentally to be a sensitive measure of internal damage. To quantify the dependence of electrical resistance on mechanical fiber damage at the micromechanical level, a numerical e ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
EPFL2004
, , ,
A novel thermoplastic programmable preforming process, TP-P4, has been used to manufacture preforms for non-isothermal compression molding. Commingled glass and polypropylene yarns are deposited by robot onto a vacuum screen, followed by a heat-setting ope ...
Springer Netherlands2009
transverse direction is investigated with application to the Glass Mat reinforced Thermoplastics (GMT) lamination process in a double belt press.Amodel proposed in Part I to simulate the kinetics of impregnation and the evolution of the fiber volume fracti ...
2001
,
The present study investigates the origin of voids in sheet molding compounds (SMCs) sheets and their transport during the manufacturing steps. Paste mixing, impregnation, thickening, and molding have been performed with five different SMC sheets, one with ...
2006
In the context of sustainable development, building insulation represents a major concern as a means of increasing energy efficiency. In order to comply with new norms such as the Passive House standard, locations where load-bearing components must penetra ...
