Variational phase-field continuum model uncovers adhesive wear mechanisms in asperity junctions
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The present work investigates the mechanical integrity of multilayer films developed for flexible displays. The layers comprise tin-doped indium oxide (ITO) conductive coatings and alumina barrier coatings sputtered onto high temperature aromatic polyester ...
The influence of applied stress on the equilibrium shape of a liquid intergranular inclusion is derived to show that (i) results differ significantly from those for a void, and (ii) this difference explains the experimental data if liquid inclusions behave ...
Quasi-static axial tension experiments were performed in a laboratory environment on epoxy bonded, balanced double-lap and single-lap joints from pultruded GFRP flat sections. Full-scale specimens were used to avoid size effects. Parameters investigated we ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
Molecular dynamics is used to examine the deformation and failure of Al-Si interfaces and of nanocomposites consisting of Al and Si nanograins loaded in tension. The modified embedded atom method, is used to describe the forces and energies in the system a ...
The importance of Fibre Reinforced Polymers (FRPs) as a material used for civil engineering purposes has grown in the last decade. Especially the introduction of pultrusion at an industrial level as a way to produce big batches of FRP made it possible to o ...
This paper proposes an analytical method to assess softerror rate (SER) in the early stages of a System-on-Chip (SoC) platform-based design methodology. The proposed method uses an executable UML model of the SoC for its input. Soft-errors on the design ar ...
The short-term mechanical strength of platelet-reinforced polymer composites was modeled using classical two-dimensional stress-transfer analysis. The stress field in the platelet and at the platelet/matrix interface was described in the presence of a matr ...
The short-term mechanical strength of platelet-reinforced polymer composites was modeled using classical two-dimensional stress-transfer analysis. The stress field in the platelet and at the platelet/matrix interface was described in the presence of a matr ...
We report on the degradation of platinum micro-heating elements operating at high temperatures. Devices with platinum heaters suspended on micro-machined dielectric membranes were self-heated at high temperature until failure. Optical and SEM observations ...
