The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: Experimental investigation and modelling the transformation kinetics
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Publications related to The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: Experimental investigation and modelling the transformation kinetics | EPFL Graph Search
Flexures are used in precision engineering where highly accurate, wear-free, smooth and repeatable motion is desired. Flexures are based on deformation of material to achieve a motion between elastically joined parts. They are used in a variety of precisio ...
By following the densification kinetics of nanocrystalline γ alumina and corresponding microstructural evolution we showed that the diffusive transformation gamma-alpha involves several processes such as nucleation of alpha phase, rearrangement of gamma cr ...
This work is focussed on a high carbon tool steel used for the production of files. The mechanical properties of the files depend on a hardening thermal treatment that produces a martensitic structure. Thus, the motivation for this work is technological: w ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
The Two-Way Shape Memory Effect (TWSME) has been widely studied in the literature. However, little attention has been paid about the out-of-equilibrium behavior of the TWSME. This paper reports some experiments, which were performed on specimens, previousl ...
Different ODS EUROFER steels reinforced with Y2O3 and MgAl2O4 were elaborated by mechanical milling and hot isostatic pressing. Good compromise between strength and ductility could be obtained but the impact properties remain low (especially for the Y 2O3 ...
In an effort to better understand the plasticity of tempered martensitic steels, uniaxial tension and compression tests were carried out. The temperature dependence of both the yield stress and the post-yield stress behavior were compared, and it was shown ...
The purpose of the present work is to study the relation between the microstructure and the martensitic transformation in a binary NiTi alloy. Moreover, it has been conducted on wires which diameters are between 1.52mm and 50µm in order to demonstrate the ...
