Experimental assessment of an active (acoustic) liner prototype in an acoustic flow duct facility
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The currents in the lowest few millimeters of the bottom boundary layer of lakes are highly important for the dissipation of kinetic energy and for chemical processes such as oxygen transfer into the sediment. So far, no high-resolution flow velocity profi ...
The dissipation of energy of flood discharges from water releasing structures of dams is often done by plunging jets diffusing in water and impacting on the riverbed downstream. The construction of expensive concrete structures for energy dissipation can b ...
One-dimensional stability analysis of a hydraulic system composed of a penstock, a runner and a draft tube was carried out to determine the cause of the full load draft tube surge. It is assumed that the cavity volume at the runner exit is a function of th ...
One-dimensional stability analysis of a hydraulic system composed of a penstock, a runner, and a draft tube was carried out to determine the cause of the full load draft tube surge. It is assumed that the cavity volume at the runner exit is a function of t ...
Methods to measure airflow rates using tracer gas in single air handling units are well known. In some buildings however, in particular in Singapore, rooms are often ventilated with two or more units and present large recirculation rates. Large recirculati ...
At this time, a large number of hydraulic turbomachinery installations are ageing, so that they need refurbishement to increase their efficiency and their associated output power. The items that need refurbishement are mainly the runner and the guide vanes ...
Investigation of the rotor-stator interactions of a reduced-scale model 0.19 ν= pump-turbine in generating mode is presented for the maximum discharge operating condition. This operating point is chosen in order to have the most important rotor-stator inte ...
International Association For Hydraulic Research2006
Low Pressure Plasma Spraying (LPPS) processes use a DC plasma jet expanding at low pressure for fast deposition of dense coatings in a controlled atmosphere. The LPPS technology is widely used industrially in particular in the aeronautics and medical indus ...
Methods to measure airflow rates using tracer gas in single air handling units are well known. In some buildings however, in particular in Singapore, rooms are often ventilated with two or more units and present large recirculation rates. Large recirculati ...
