Assessment of representativity of the PETALE experiments for validation of Swiss LWRs ex-core dosimetry calculations

Hakim Ferroukhi, Vincent Pierre Lamirand, Axel Guy Marie Laureau, Andreas Pautz, Dimitri Rochman, Alexander Vasiliev
E D P SCIENCES, 2020
Conference paper

Abstract

The international experimental program PETALE will be carried out at the CROCUS research reactor of EPFL. The program aims at measuring neutron penetration in slabs made of materials composing typical LWR reactor pressure vessel. The measurements will be used for code and nuclear data validation and for the evaluation of the reflecting properties of these materials. In this paper the representativity of the PETALE experiments is assessed with respect to operational LWR reactors dosimetry and activation evaluations using the Paul Scherrer Institute (PSI) in-house tool NUSS. The NUSS tool allows the stochastic sampling of nuclear data using covariance matrices available in modern nuclear data libraries and the subsequent running of a Monte Carlo code with the modified data files. The representativity can then be assessed based on the Pearson correlation coefficients. The ultimate goal of the work is first of all to assess if the planned PETALE measurements could be applicable beyond their primary purpose and serve for extending the PSI validation database for LWR reactor dosimetry evaluations. Secondly, provided that the PETALE measurements are found useful for the task above, the information on the correlations between the PETALE neutron detectors' responses and the reactor dosimetry quantities of interest, shall be presented and discussed.

Official source

https://infoscience.epfl.ch/record/285515?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Linac4 is the new negative hydrogen ion (H-) linear accelerator of the European Organization for Nuclear Research (CERN). Its ion source operates on the principle of Radio-Frequency Inductively Coupled Plasma (RF-ICP) and it is required to provide 50 mA of H- beam in pulses of 600 us with a repetition rate up to 2 Hz and within an RMS emittance of 0.25 pi mm mrad in order to fullfil the requirements of the accelerator. This thesis is dedicated to the characterization of the hydrogen plasma in the Linac4 H- ion source. We have developed a Particle-In-Cell Monte Carlo Collision (PIC-MCC) code to simulate the RF-ICP heating mechanism and performed measurements to benchmark the fraction of the simulation outputs that can be experimentally accessed. The code solves self-consistently the interaction between the electromagnetic field generated by the RF coil and the resulting plasma response, including a kinetic description of charged and neutral species. A fully-implicit implementation allowed to simulate the high density regime of the Linac4 H- ion source, ensuring the energy conservation while maintaining the computational resources tractable. We studied the capacitive to inductive transition characteristic of the initial phase of the pulsed discharge. The simulation results were confirmed by time-resolved photometry measurements and allowed quantifying the effect of the hydrogen pressure and of the external magnetic cusp field on the transition dynamics. This provided insights into possible modifications to the magnetic cusp field configuration to maximize the power deposited to the plasma. The optimal ion source configuration maximizes the density of volume produced H-, the flux of H0 atoms onto the cesiated molybdenum plasma electrode surface at the origin of H- emission, and minimizes the electron density and energy in the beam formation region. We simulated the high-density regime (10^19 m-3) representative of the nominal operation of the Linac4 ion source during beam extraction. We performed a parametric study of the RF current, hydrogen pressure and magnetic configuration (cusp and filter) to assess their impact on the plasma parameters. The simulation results allowed assessment of these parameters and provided guidelines for the optimization of the ion source operational and design parameters. The simulation results of electron density, electron energy and hydrogen dissociation degree showed excellent agreement with optical emission spectroscopy measurements both as a function of RF coil current and magnetic configuration. The outputs of these simulations provide crucial inputs to beam formation and extraction physics models. Dedicated PIC software packages are being developed that will eventually shed insight into essential beam parameters such as the intensity and emittance of the H° beam and the intensity of the co-extracted electrons.

EPFL2017

VERIFICATION OF A REACTOR PHYSICS CALCULATION SCHEME FOR THE CROCUS REACTOR

Gaëtan Girardin, Mathieu Hursin, Andreas Pautz, Adolfo Rais, Daniel Jerôme Siefman

CROCUS is a zero power (100 W) reactor of the Laboratory for Reactor Physics and Systems Behavior (LRS) at the Swiss Federal Institute of Technology, Lausanne (EPFL). It is used for teaching and research purposes. Its modeling has relied so far on diffusion theory and point kinetics for the neutronic analysis and simplified thermal hydraulics models for accident analysis. Recently, an effort has started within the LRS to improve its modeling capabilities, the long term goal being to update the CROCUS Safety Analysis Report (SAR) for improved operational flexibility. The present work is focused on the static neutron analysis of CROCUS through the development and preliminary verification of a 3D nodal simulator (e.g. PARCS) model of the reactor, a methodology typically used in the industry for modeling of Light Water Reactors (LWR). The set of homogenized macroscopic cross-sections needed by the core simulator, referred in this work as nuclear data library, is generated by a Monte Carlo based code (e.g. Serpent). The quantities of interest for the verification of the model are the keff, and the control rod worths. An innovative homogenization approach to generate the nuclear data library is considered due to the irregular radial geometry of the CROCUS reactor. The reference solution is provided by another Monte Carlo code, MCNP5. The uncertainty due to the nuclear data in the keff prediction of Serpent is also investigated and amounts to about 500pcm which covers the deviation from unity of keff prediction by MCNP5 and Serpent for a critical CROCUS configuration. PARCS keff predictions are within 400 pcm of the Serpent results.

2014

Determination of the activity inventory and associated uncertainty quantification for the CROCUS zero power research reactor

Mathieu Hursin, DongHyuk Lee, Andreas Pautz

The paper describes the source term estimation of CROCUS, the zero power research reactor of EPFL, to be used for dispersion analysis under accidental conditions. To fulfil regulatory requirements, the source term of the CROCUS fuel is estimated through Monte Carlo simulations supplemented by uncertainty quantification, both obtained from the Monte Carlo code MCS developed at UNIST. Even though the depletion capabilities of MCS were pre-existing to this work, no verification has been documented so far. A comparison of MCS and SERPENT results for the determination of the activity inventory for the CROCUS fuel is presented; both codes agree within the 1% for the major isotopes contributing to both inhaled and ingested doses. The source term of CROCUS is calculated under a postulated accident. Eight isotopes, 90Sr, 91Y, 131I, 137Cs, 140Ba, 140La, 144Ce, and 239Pu produce the largest contributions to the effective dose to the public. For uncertainty quantification, nuclear data uncertainties, specifically cross sections and fission yields are considered. Three stochastic sampling methods are implemented in the MCS code namely, TMC, fast-TMC and fast-GRS methods. The performances of the two fast methods have been analyzed when applied to the CROCUS reactor. All three methods produce consistent uncertainty estimates and the two fast methods showed a reduced computational cost compared to the original TMC method. The fission yield uncertainty is the leading factor for the determination of uncertainty of the activity for 90Sr, 91Y, 131I, 137Cs, 140Ba, 140La and 144Ce isotopes. On the other hand, the cross section uncertainty is the leading factor for the uncertainty of 239Pu activity. Finally, the modeling of the irradiation history for CROCUS is simplified to reduce the computational cost. It is demonstrated that the activities for the short lived isotopes (131I and 144Ce) are very sensitive to the irradiation history specifications. Nonetheless, the irradiation history used for the determination of the nominal fuel inventory activity is conservative as it overestimates the activity of the short lived isotopes.

2019

Determination of the activity inventory and associated uncertainty quantification for the CROCUS zero power research reactor

Mathieu Hursin, DongHyuk Lee, Andreas Pautz

2019

EPFL2017