A critical assessment of experimental investigation of dynamic recrystallization of metallic materials
Related publications (33)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Hot deformation behavior of the extruded Mg-6Gd-3Y (GW63) and Mg-6Gd-3Y-1Ag (GW63-1Ag) alloys was assessed by shear punch testing (SPT) method in the temperature range of 623 K to 723 K and shear strain rate of 1.6 x 10(-2)to 1.3 x 10(-1) s(-1). Microstruc ...
Two severe plastic deformation (SPD) techniques of simple shear extrusion (SSE) and equal channel angular pressing (ECAP) were employed to process an extruded Mg -6Gd -3Y -1.5Ag (wt%) alloy at 553 K for 1, 2, 4 and 6 passes. The microstructural evolutions ...
In this article, the Joule effect heating influence on recrystallization phenomena in the Inconel 718 nickel-based superalloy is investigated in details. On the one hand, static recrystallization kinetic studies at 1020 degrees C after cold deformation up ...
The deformation-induced martensitic transformation observed in specific materials can enhance their mechanical properties or result in functional properties. For example, the transformation induced plasticity (TRIP) effect results in a good combination of ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
Most of industrial hot deformation processes are performed in variable conditions where the strain rate and/or deformation temperature are not constant. In this work, hot compression tests in both constant and varying strain rate conditions were performed ...
The preferred deformation mechanisms with respect to the load path are studied in a medium stacking fault energy 304 austenitic stainless steel that exhibits both transformation induced plasticity and twinning induced plasticity. In situ neutron diffractio ...
In this article, the hot deformation mechanism of a laser-welded near a TA15 Ti-alloy joint was studied by hot tensile tests conducted at temperatures ranging from 800 degrees C to 900 degrees C with strain rates ranging from 1.0 x 10(-1) s(-1) to 1.0 x 10 ...
To investigate the effect of recrystallization on hot deformation mechanism of TA15 titanium alloy, rolled sheet and laser-welded tubes before and after recrystallization annealing were tested by uniaxial tensile tests and biaxial gas bulging respectively. ...
The stress-induced fcc-austenite to hcp-martensite transformation in the iron based shape memory alloy (SMA) Fe-17Mn-5Si-10Cr-4Ni with and without VC precipitates is investigated by in-situ neutron diffraction measurements upon uniaxial loading and unloadi ...