Probabilistic and deterministic full field approaches to simulate recrystallization in ODS steels
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A physically-based two-site mean field model has been developed to describe the microstructural evolution due to recrystallization during and after deformation. The model has been applied to predict the recrystallized fraction, recrystallized grain size, a ...
The aim of this paper is to propose a new framework for assessment of fatigue partial safety factors with focus on steel bridges welded joints. Fatigue resistance S-N curves for constant amplitude (CA) and variable amplitude (VA) loadings are defined using ...
Motivated by an increased focus on recycling of aluminium alloys, for which elements like Mn, Fe and Si tend to increase, a comprehensive investigation of the softening behavior during annealing after cold rolling of Al-Mn-Fe-Si alloys has been carried out ...
Microstructural evolution of a cold-rolled Al-Mn-Fe-Si alloy during annealing was studied. Except the as-cast variant, two other different homogenizations were considered, one gave a high density of fine dispersiods providing a considerable Zener drag infl ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
Investigation of the microstructural evolution of Al-Mn-Fe-Si alloys during annealing after cold rolling has been carried out. The effect of microchemistry state in terms of Mn in solid solution, constituents, size and volume fraction of dispersoids, intro ...
Ferritic steels are the main candidates for the structural components of future fusion reactors. Because of the complexity of their structure, most of the simulation works are focused on the base phase of these materials such as alpha-Fe or Fe-Cr alloy. In ...
Ferritic steels are the main candidates for the structural components of future fusion reactors. Because of the complexity of their structure, most of the simulation works are focused on the base phase of these materials such as alpha-Fe or Fe-Cr alloy. In ...
The microstructural evolution of deformed 304L stainless steel during static recrystallization and grain growth was characterized by EBSD within an SEM chamber, which enabled microstructural and crystallographic information to be determined. The experiment ...
The Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) oxide dispersion strengthened (ODS) reduced activation ferritic (RAF) steel was fabricated by mechanical alloying of a pre-alloyed, gas atomised powder with yttria nano-particles, followed by hot isostatic pressing and ther ...
