Publication

Flow boiling heat transfer and two-phase flow phenomena of CO2 in macro-and micro-channel evaporators: Fundamentals, applications and engineering design

Related publications (49)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Conductive Heat Transfer in Partially Saturated Gas Diffusion Layers with Evaporative Cooling

Sophia Haussener, Felix N. Büchi, Mirco Magnini

Heat transport is an important, though often neglected function of gas diffusion layers (GDLs) of polymer electrolyte membrane fuel cells. Thermal conductivity is a key property, especially in partially water saturated GDLs and when the phase change of wat ...

2022

Near-junction microfluidic cooling for high power-density GaN-on-Si electronics: A wafer, device, packaging, and system-level investigation

Remco Franciscus Peter van Erp

Electrification of the energy section, from generation to end-use, plays an essential role in reducing global CO2 emission. Innovations in power electronics are required to increase conversion efficiency and power density. Gallium nitride (GaN) transistors ...

EPFL2022

Flow Boiling of Carbon Dioxide at Different Channel Orientations for the Thermal Management of Future Detector Technologies at the High-Luminosity Large Hadron Collider at CERN

David Schmid

The global warming potential (GWP) of working fluids in thermodynamic cycles and their environmental impact have been gaining considerable attention within the recent years. The global objectives on climate protection are becoming increasingly ambitious, w ...

EPFL2022

Multiphase transport and evaporative cooling in fuel cell gas diffusion layers

Sarah van Rooij

The use of evaporative cooling in the gas diffusion layer (GDL) of polymer electrolyte fuel cells has been proposed as a simple yet impactful solution to simultaneously provide the functionality of cell cooling, thanks to the dissipation of the latent heat ...

EPFL2021

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

The development of new adhesives has allowed to expand the application of bonding into the most diverse industrial fields. This review article presents the commonly used experimental methods for the investigation of mechanical performance of adhesively bon ...

TAYLOR & FRANCIS LTD2021

, , , , ,

The pulsating nature of a closed loop pulsating heat pipe (CLPHP) makes the prediction of its thermal-hydraulic performance extremely challenging. Unfortunately, the design of CLPHPs is still quite an empirical process, requiring testing of many prototypes ...

IEEE2019

This paper presents a comprehensive and critical review of studies on nucleate pool boiling heat transfer, flow boiling heat transfer, critical heat flux (CHF), and two-phase flow phenomena with nanofluids. First, general analysis of the available studies ...

TAYLOR & FRANCIS INC2019

Current repair initiatives, from networks of repair cafés run by local volunteers to community-turned-company iFixit, have been very successful at putting questions of repair and maintenance at the forefront of public debate. However, they have done so in ...

2019

Experimental characterisation of the thermohydraulic performance of a micro-pin fin evaporator: Heat transfer, flow visualization and modelling

Chiara Falsetti

The global tendency towards miniaturization driven by the microelectronics industry is pushing system density and packaging towards unprecedented values of thermal design power, with a dramatic reduction of the surface area of the devices. Vertical integra ...

EPFL2018