Defect formation and mitigation during laser powder bed fusion of copper
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Fiber lasers are compact lightsources with high intrinsic beam quality and high efficiency. The lasing spectrum ranges from the blue to the near infrared and is achievable using fibers with different dopants and glass compositions. All-fiber lasers are cha ...
First investigations of photoacoustic (PA) spectroscopy (PAS) of methane using an antimonide semiconductor laser are reported. The laser fabrication is made in two steps. The structure is firstly grown by molecular beam epitaxy, then a metallic distributed ...
An ammonia traces analyser based on photoacoustic spectroscopy is described. The system uses a CO2 laser and a properly designed resonant photoacoustic cell to achieve ammonia detection at sub-parts-per- billion (ppb) level. The instrument features unatten ...
Frequency stabilization is generally performed by using atomic or molecular absorption lines. However, it is sometimes necessary to lock a laser at a frequency located outside of any absorption peaks. In this case, an offset locking configuration is necess ...
A new procedure for laser spot welding of thin copper stripes was developed based on measuring the calibrated reflectivity coaxially to the laser beam and using this signal for in situ control of the laser power. Experiments with a power ramp of r=3.1 MW/s ...
Nd:YAG laser welding of high reflectivity metals is difficult because of the highly non-linear light-material interaction yielding a narrow process window and poor reliability. However, achieving high reliability is mandatory for applying this technique in ...
The launch of molecules from liquid surfaces in a time of flight mass spectrometer has been investigated using different sample preparation techniques, and by exposing the liquid samples to two different laser wavelengths, 337 nm from a N2 ultraviolet lase ...
Because of the strong electron-phonon coupling of the emitting 3d orbital in transition-metal (TM) ions, 3d systems exhibit luminescence with typically several hundred nm of spectral bandwidth. TM-ion-doped materials are, therefore, of high interest for ap ...
Characteristics of one-cascade (1.06 double right arrow 1.24 mum) and two-cascade (1.06 double right arrow 1.24 double right arrow 1.48 mum) phosphorus-doped fiber Raman lasers are studied. The cavities of both lasers are formed by Bragg gratings written d ...
Epitaxial Laser Metal Forming (E-LMF) consists in impinging a jet of metallic powder onto a molten pool formed by controlled laser heating and thereby, generating epitaxially a single crystal deposit onto the damaged component. This new technique aims to b ...
