The design and synthesis of nanostructured hydrogen oxidation reaction electrocatalysts for hydroxide exchange membrane fuel cells
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The aim of this work is to develop a microstructured reactor based on filamentous catalysts for the Oxidative Steam-Reforming of Methanol (OSRM), to produce hydrogen as feed for a fuel cell, in an autothermal way. Hydrogen is produced by the methanol Steam ...
Ni-YSZ anode supports show a fundamentally different microstructure from screenprinted Ni-YSZ anodes on YSZ electrolyte supports. Of high density and composed of fine zirconia and nickel oxide to allow for cofiring with a thin zirconia electrolyte film (5 ...
The aim of this work was to operate the steam reforming of methanol and the total oxidation of methanol in a microstructured two-passage reactor. The steam reforming enables the production of hydrogen at relatively low temperatures (250 °C) with only a sma ...
Fundamental and phenomenological models for cells, stacks, and complete systems of PEFC and SOFC are reviewed and their predictive power is assessed by comparing model simulations against experiments. Computationally efficient models suited for engineering ...
We performed high-resolution angle resolved photoelectron spectroscopy studies of quasi-one-dimensional organic materials. For TTF-TCNQ, we observe dispersive spectral features corresponding to the donor and acceptor band. For the Bechgaard salts (TMTSF)(2 ...
The use of ammonia as a source of hydrogen for fuel cells has received little attention until now. Ammonia offers several advantages over hydrogen as a fuel and is produced commercially in massive quantities and as a biogas. This paper describes the result ...
Polymer electrolyte and solid oxide are the two fuel cell types (PEFC, SOFC) under development in Switzerland. The very distinct operating temperatures of 80 °C (PEFC) and 800–950 °C (SOFC) impose fundamentally different requirements upon the nature of the ...