Superconducting 2D NbS2 Grown Epitaxially by Chemical Vapor Deposition
Related publications (40)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
DC reactive magnetron sputtering was used for the deposition of Zr–Si–N thin films. Four series of samples have been deposited at various substrate temperatures TS: 300 K, 510 K, 710 K and 910 K. Depending on TS, different N2 partial pressures pN2 were req ...
Titanium aluminium nitride (TiAlN)-based coatings are designed specially for applications where oxidation and wear resistance are primary demands, as in the case of cutting tools. Moreover the coatings are required to be thermally stable as well as have go ...
A very promising way to increase the detection efficiency of nanowire superconducting single-photon detectors (SSPDs) consists in integrating them with advanced optical structures such as distributed Bragg reflectors (DBRs) and optical waveguides. This req ...
Strontium barium niobate (SrxBa1-xNb2O6, shortly SBN) is a solid solution system with tetragonal tungsten bronze crystal structure. It exhibits a ferroelectric phase with only one polar axis and a transition temperature depending on the Sr/Ba ratio. This t ...
Due to their high hardness, high melting point and high chemical stability, transition metal nitrides present a great interest for various applications. This work constitutes a contribution to the understanding of the properties of Nb based binary and tern ...
Spark Plasma Sintering (SPS) has been successfully applied in the sintering of nanocrystalline BaTiO3 and γ-Al2O3 in order to reach fully dense nanostructured ceramics at moderate pressure and temperature. BaTiO3 compacts with densities exceeding 97% and g ...
We report on a study of pentacene thin-films grown by high vacuum deposition on silicon dioxide, using atomic force microscopy (AFM) and transmission electron microscopy (TEM). The nucleation density of pentacene islands on SiO2is found to rise ...
When AxGa1-xAs layers are grown on V-grooved GaAs substrates by metal organic chemical vapour deposition (MOCVD), a Ga rich vertical quantum well (VQW) appears in the V-groove centre. The width and Ga enrichment of this structure depend on the nominal Al c ...
Light Induced Chemical Vapour Deposition (LICVD) of titanium dioxide thin films is studied in this work. It is shown that this technique enables to deposit locally and selectively a chosen crystalline phase with a precise controlled thickness at low substr ...
A comprehensive model for the electronic transport in polycrystalline ZnO:B thin films grown by low pressure chemical vapor deposition is presented. The optical mobilities and carrier concentration calculated from reflectance spectra using the Drude model ...