From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Carbon nanofibers (CNF) were synthesized on sintered metal fibers (SMF) filters of nickel and Ni-containing alloys (Inconel, stainless steel (SS)) by thermal chemical vapor deposition of ethane in the presence of hydrogen at not, vert, similar660 °C. The C ...
We report on the fabrication and electrical characterization of functionalized solid-state nanopores in low stress silicon nitride membranes. First, a pore of approximately 50 nm diameter was drilled using a focused ion beam technique, followed by the loca ...
The focused electron beam induced deposition process is a promising technique for nano and micro patterning. Electrons can be focused in sub-angström dimensions, which allows atomic-scale resolution imaging, analysis, and processing techniques. Before the ...
Light Induced Chemical Vapour Deposition (LICVD) of titanium dioxide thin films is studied in this work. It is shown that this technique enables to deposit locally and selectively a chosen crystalline phase with a precise controlled thickness at low substr ...
Oriented films of tetracene and pentacene have been obtained by high vacuum sublimation onto oriented poly(tetrafluoroethylene) (PTFE) substrates. Polymorphism, orientation, and morphology of the pentacene and tetracene films are studied as a function of d ...
Electron Beam Induced Deposition (EBID) allows deposition of three-dimensional micro- and nano-structures of conductive and insulating materials on a wide range of substrates. The process is based on the decomposition of molecules of a pre-selected precurs ...
During nanoindentation measurements of thin films the formation of cracks within the film as well as of pile-up or sink-in around the indent are known to affect significantly the precision of hardness and Young's modulus values. The crack pattern in brittl ...
A flexible method for simultaneous nanoscale structures fabrication and patterning is described, using a combination of stencil mask and pulsed-laser deposition (PLD) techniques. A miniature shadow-mask with nano-apertures in a very thin microfabricated me ...
Two methods were used for the deposition of Pt particles on synthetic B-doped diamond (BDD) surfaces: chem. deposition and electrodeposition under potentiostatic conditions. However, electrodeposition leads much higher Pt dispersion than chem. deposition. ...
In the framework of this thesis molecular nanostructures have been engineered on surfaces and are characterized using a variety of techniques. Two types of molecules have been used: carbon nanotubes (CNT) and 4-[trans-2-(pyrid-4-yl-vinyl)] benzoic acid (PV ...