Imaging of Chemical Kinetics at the Water–Water Interface in a Free-Flowing Liquid Flat-Jet

Bruno Credidio, Andreas Osterwalder
2022
Journal paper

Abstract

We present chemical kinetics measurements of the luminol oxidation chemiluminescence (CL) reaction at the interface between two aqueous solutions, using liquid jet technology. Free-flowing liquid microjets are a relatively recent development that have found their way into a growing number of applications in spectroscopy and dynamics. A variant thereof, called flat-jet, is obtained when two cylindrical jets of a liquid are crossed, leading to a chain of planar leaf-shaped structures of the flowing liquid. We here show that in the first leaf of this chain, the fluids do not exhibit turbulent mixing, providing a clean interface between the liquids from the impinging jets. We also show, using the example of the luminol CL reaction, how this setup can be used to obtain kinetics information from friction-less flow and by circumventing the requirement for rapid mixing by intentionally suppressing all turbulent mixing and instead relying on diffusion.

Official source

https://infoscience.epfl.ch/record/293727?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

FH HES Optimization of Chemical Reactor Feed by Simulations Based on a Kinetic Approach

Charles Ibrahim Guinand, Thierry Meyer, Francis Stoessel

Chemical incidents are typically caused by loss of control, resulting in runaway reactions or process deviations in different stages of the production. In the case of fed-batch reactors, the problem generally encountered is the accumulation of heat. This is directly related to the temperature of the process, the reaction kinetics and adiabatic temperature rise, which is the maximum temperature attainable in the event of cooling failure. The main possibility to control the heat accumulation is the use of a well-controlled adapted feed. The feed rate can be adjusted by using reaction and reactor dynamic models coupled to Model Predictive Control. Thereby, it is possible to predict the best feed profile respecting the safety constraints.

Schweizerische Chemische Gesellschaft2014

Decamethylruthenocene Hydride and Hydrogen Formation at Liquid|Liquid Interfaces

Hubert Girault, Manuel Alejandro Méndez Agudelo, Pekka Eero Peljo, Lucie Josette Renée Rivier, Micheal Diarmaid Scanlon, Thomas James Stockmann

The formation and the dissociation of metal hydrides are key steps within the hydrogen evolution reaction (HER) pathway for photochemical water splitting, but also impacts a wide range of other catalytic, industrial, and biochemical reactions. Herein, we describe our recent work studying HER at the interface between two immiscible electrolyte solutions (ITIES), between water|1,2-dichloroethane. This is a unique platform for evaluating the kinetics/thermodynamics for metallocene hydride formation using decamethylruthenocene. In this approach, an aqueous acid serves as the proton source and is pumped across the ITIES via an externally applied potential or the use of a phase transfer catalyst. Simulated curves developed using COMSOL Multiphysics software and compared to experimental ones, indicate a modified EC′ (electrochemical–chemical) mechanism for the decamethylruthenocene hydride formation. In the proposed pathway, decamethylruthenocene hydride is metastable in 1,2-dichloroethane and persists on the time scale of the recorded cyclic voltammograms long enough to transfer to the aqueous phase where it quickly dissociates. This is evidenced through an asymmetric, ion transfer wave observed experimentally and concluded to be hydride transfer. Shake-flask experiments with head space gas sampling demonstrated that hydrogen production was observed only when the biphasic system was positively polarized, to favor proton transfer, and decamethylruthenocene was photoactivated. This approach, combining electrochemical, simulation, and chromatographic methods, brings new insight into the factors that underlie the mechanism and rates of hydride formation/dissociation at soft interfaces.

American Chemical Society2015

The unique structure and dynamics of the water hydrogen (H)-bond network enable a multitude of structures and chemical reactions in both bulk solutions and at interfaces. The underlying molecular interactions between water and dissolved electrolytes, organic molecules, and nanoscale interfaces are difficult to study and hence not fully understood, especially when it involves interactions of length scales larger than one nanometer. In this thesis, we perform second order nonlinear light scattering experiments to investigate extended hydration shells (over one nanometer) and interfacial structures of buried aqueous interfaces that surround nanodroplets. We investigate the spatial range of ion-water interactions by probing the molecular structure of the water network in dilute electrolyte solutions. We find that electrolytes induce long-range, non-ion-specific orientational order in the H-bond network of water (over distances up to 70 hydration shells or 20 nm). These modifications in the water network start at electrolyte concentrations as low as 10 micromolar. The amount of induced orientational order and the concentration at which it occurs is different between light and heavy water. We link the observed ion induced changes in the bulk H-bond network of water to ion induced surface tension anomalies that occur in the same concentration range. We also study the same interactions in solutions with higher electrolyte concentrations focusing on cations. We observe specific ion effects in both the local charge distribution and water ordering in extended hydration shells of ions. Cations with larger charge densities induce larger changes in these two observables that follow a direct Hofmeister trend. The ion-induced structural changes in the water network are strongly correlated with the viscosity B-coefficient and hydration free energy of cations. These correlations facilitate constructing a better molecular model for specific ion effects in aqueous solutions. Next, we study the nanoscale hydrophobe/water interface and related interactions by probing the molecular structure of the interface formed with amphiphilic alkanols. We find that alkanols form a fluid film at the oil nanodroplet surface. Long chain alkanols show similar molecular structures and number densities at the interface. With increasing alkanol density, interfacial water loses its initial orientational alignment. The structure of interfacial oil molecules is more distorted for shorter alkanols. This interfacial structure differs significantly from those of macroscopic planar alkanol/water and alkanol/air interfaces and charged surfactant/oil/water interface, which can be explained by the balance between dispersive and H-bonding interactions. Finally, we develop a new membrane model system: 3D-lipid monolayers with tunable molecular structure on oil nanodroplets in water. This in-situ prepared system mimics the structure of lipid droplets in cells. The interfacial structure of lipids can be tuned from a tightly packed monolayer (liquid condensed phase) to a dilute one (liquid condensed/liquid expanded coexistence phase) by varying the lipid/oil/water ratio. The tunability of the chemical structure, the high surface-to-volume ratio, and the small sample volume make this system ideal for studies of molecular interactions of lipids in membranes.

EPFL2017