Bronze-Phase TiO2 as Anode Materials in Lithium and Sodium-Ion Batteries
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Alternative cathode materials were investigated for application to high voltage lithium ion batteries. Manganese based materials were considered due to the low cost and environmentally sustainable impact. Layer-structured oxide and phospho-olivine material ...
LiMnPO4 was synthesized using a sol–gel method and tested as a cathode material for lithium ion batteries. After calcination at temperatures between 520 and 600 ◦C, primary particle sizes in the range of 140–220 nm were achieved. Subsequent dry ball millin ...
The disintegration of the carbon anodes during the electrolysis of alumina produces dust particles contaminating the electrolytic bath. This phenomenon, called dusting, is one of the most deleterious Al electrolysis failures, as it leads to a significant d ...
We review herein several important aspects of surface chemistry in Li-ion batteries, and discuss the use of ionic liquids (ILs) for rechargeable Li batteries. We explored the suitability of ILs for 5 V cathodes and Li-graphite anodes. Some advantages of th ...
Microstructural evolution of anode supported solid oxide fuel cells (SOFC) during medium-term stack testing has been characterized by scanning electron microscopy (SEM). Low acceleration voltage SEM imaging is used to separate the three anode phases (nicke ...
Fluorescent dihydroxypyridine ligands were prepared by attaching pyrene-, dansyl-, and methoxycoumarin-fluorophores via dimethyleneamine linkers. The reaction of these ligands with [(p-cymene)RuCl2]2 or [(C6H5CH2NMe2H)RuCl2]2Cl2 resulted in the formation o ...
A novel polyol synthesis was adopted to synthesize nano-structured LiMnPO4. This route yields well-crystallized nanoparticles with platelet morphology that are only similar to 30 nm thick oriented in the b direction. The obtained material presented a good ...
The conventional strategy of overcharge protection for lithium ion batteries uses redox molecules having oxidation potential higher than the cathodic materials in the electrolyte. Here we propose a novel approach by using redox molecules having reduction p ...
The common technology for solid oxide fuel cells (SOFC) is based on a cermet anode of nickel with yttrium stabilized zirconia (YSZ), often used as the supporting structure. One of the main limitations of this anode technology is the redox tolerance. In thi ...