Effect of ZnO on the reactivity of cementitious systems
Related publications (57)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...
The replacement of clinker with supplementary cementitious materials (SCMs) is the most interesting solution to reduce the CO2 emissions from cement production. The abundant availability of clays, which have a sufficient amount of kaolinite content in Thai ...
This work studies the effect on Embodied Energy (EE) of concrete when Ordinary Portland Cement (OPC) is partially substituted with natural Pozzolanic Volcanic Ash (VA) at the material and the building scale. The work aims to demonstrate potential improveme ...
2018
,
This study focused on understanding the influence of different amounts of calcite impurities (0 to 10% by mass) on the optimal parameters for clay dehydroxylation and the reactivity of the final calcined clay. A surface response experimental design was use ...
SPRINGER2018
Partial replacement of clinker with supplementary cementitious materials (SCMs) is an effective approach to reduce CO2 emissions related to cement production. However, there is a maximum substitution level with SCMs beyond which strength decreases. The und ...
X-ray powder diffraction (XRPD)-based quantitative phase analysis is a common technique for studying the hydration of cementitious systems. Hydrated cements often comprise several amorphous or nanocrystalline phases. This paper presents a protocol for the ...
Precipitation is a process wherein a solid phase forms from a solution. Precipitation is at the heart of many industries producing pharmaceuticals, catalysts, ceramics, and nanoparticles. In addition to being a material synthesis route, precipitation has i ...
This paper investigates the fundamental mechanisms behind the effect of supplementary cementitious materials (SCMs) on the basic creep behavior of cement pastes. The intrinsic creep properties of the C-S-H gel are assessed based on measurements of uniaxial ...
The single layer Zn44Sb39Se17 thin film, being fabricated by Sb70Se30 and Zn using co-sputtering method, exhibits double phase change transition. The double phase change processes are mainly attributed to the crystallization of the Sb and ZnSb phases. The ...
Ye'elimite (Ca4Al6O12SO4 or C(4)A(3)S) is the main hydraulic mineral present in calcium sulphoaluminate cement (CSA). Its reaction is responsible for the (early) hydration and associated cement properties such as the chemical shrinkage. This paper discusse ...