Nanoscale modelling of ionic transport in the porous C-S-H network
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The lattice Boltzmann method is used to investigate the permeability of microstructures of cement pastes generated using the numerical models CEMHYD3D (Bentz, 1997) and mu IC (Bishnoi and Scrivener, 2009). Results are reported as a function of paste water- ...
A self-healing cement for use in wells in which carbon dioxide is injected, stored or extracted, comprises a carbonaceous material. In the event of cement-matrix failure, or bonding failure between the cement/casing interface or the cement/borehole-wall in ...
The long-term expansion of calcium aluminate cement and calcium sulfoaluminate cement in the presence of added gypsum has been studied for samples cured under water. Progressively higher amounts of gypsum were added to the CAC or CSA and it was found that ...
We have combined Piezoresponse Force Microscopy and Kelvin Probe Force Microscopy (KPFM) to study screening charge dynamics in written domains on PbZr0.2Ti0.8O3 (PZT) thin film surfaces under a controlled environment and at variable temperature. The screen ...
The pores in cementitious materials, their sizes and connectivity have an important influence on the durability of concrete. Several microstructural models have been developed to simulate the three-dimensional pore network in cement pastes. In this article ...
High-performance concrete is sensitive to early-age cracking, mainly due to its rapidly-developing autogenous shrinkage. Autogenous shrinkage and internal relative humidity (RH) decrease are direct consequences of the emptying of capillary pores due to cem ...
The setting of Roman cement is so rapid as to make the use of retardation essential in most practical mortars. This work reports an approach to retardation of Roman cement mortars by means of a pre-hydration process in which pre-determined amounts of water ...
Durability and safety of concrete structures are fully governed by mechanical properties. This is especially true at early age, when cement matrix is not yet fully developed, and phase arrangement becomes critical for understanding mechanical behavior. Thi ...
Supplementary cementitious materials (SCMs) are widely used to partially replace portland clinker in blended cements. Reducing clinker contents further without compromising the development of early strength necessitates a better assessment and enhancement ...
A 3D lattice Boltzmann model is developed and used to calculate the water and gas permeabilities of model cement pastes at different degrees of water saturation. In addition to permeable micron-sized capillary pores and impermeable solid inclusions, the la ...
