Heat transfer of flow boiling carbon dioxide in vertical upward direction
Related publications (44)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Multi-microchannel evaporators used for the cooling of high heat flux electronics have been of interest to both industry and academia for more than a decade. Such interest has sparked a large number of research studies on the flow boiling pressure drop and ...
Advances in the development of micro- and nanostructured surfaces have enabled tremendous progress in delineation of mechanisms in boiling heat transfer and have propelled the rapid enhancement of heat transfer rates. This area of research is poised to mak ...
New experimental flow boiling heat transfer results averaged along a very low thermal conductivity polyimide channel are presented. The experimental setup consists of a horizontal, 285 mm-long, 2.689 mm inner diameter polyimide tube, heated by a counter-cu ...
Pergamon-Elsevier Science Ltd2016
,
Boiling heat transfer in microchannels has been investigated extensively in the last two decades. However, most results from independent experimental studies display a substantial disagreement on the influence of the flow conditions and mechanisms on the h ...
This article presents an experimental study of upward flow boiling heat transfer in multiport tubes. Usually, multiport tubes are utilized horizontally in automotive and air-conditioning systems while here there is interest in vertical flow as part of a tw ...
2012
,
Experimental flow boiling heat transfer results are presented for horizontal 1.0 and 2.2 mm I. D. (internal diameter) stainless steel tubes for tests with R1234ze(E), a new refrigerant developed as a substitute for R134a with a much lower global warming po ...
2012
, , ,
This article is the second part of a study on flow boiling of R236fa and R245fa. This part presents the heat transfer coefficients obtained in a 12.7 mm silicon evaporator composed of 135 microchannels with 85 mu m wide and 560 mu m high channels separated ...
An experimental study is presented to characterize two-phase thermal and hydraulic performance of a prototype corrugated plate heat exchanger with small pressing depth. In particular, upward flow boiling of low pressure refrigerant R245fa was investigated ...
Infrared thermography is used in TCV to measure the heat flux deposited onto the graphite tiles of the inner wall. The heat flux radial profile is found to be well described by the sum of a main parallel component and a non negligible cross-field component ...
An extensive experimental study was undertaken to measure nucleate pool boiling heat transfer coefficients, local bundle boiling heat transfer coefficients, and two-phase bundle pressure drops for R134a and R236fa on one plain tube bundle configuration. Th ...