Publication
Neutronics Analyses of EU DEMO 2020 EC Port Configuration
Related publications (57)
Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV
Sophie Danielle Angelica Gorno
Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...
EPFL2024Demonstration of a sparse sensor placement technique to the limited diagnostic set in a fusion power plant
Artur Perek, Lorenzo Martinelli
DEMO will have a limited diagnostic set for optimization of reactor performance, and limited diagnostic coverage due to challenging reactor conditions. This poses challenges for control, especially for detachment control which is planned to be performed wi ...
Elsevier Science Sa2024Integrated modelling of neon impact on JET H-mode core plasmas
Nuclear fusion reactor plasmas will need to exhaust a significant proportion of energy flux through radiative processes, to enable acceptable divertor loads. This can be obtained by line radiation from impurities, injected from the plasma edge. There are h ...
IOP Publishing Ltd2023Full-discharge simulation and optimization with the RAPTOR code, from present tokamaks to ITER and DEMO
Tokamak devices aim to magnetically confine a hydrogen plasma at sufficiently high pressure to achieve net energy production from nuclear fusion of light isotopes. Predictive modeling and optimization is crucial for reliable operation of tokamak reactors, ...
EPFL2023Evaluation of neutron dose rates at the TCV tokamak facility
Patrick Blanchard, Henri Weisen, Matteo Vallar
A detailed MCNP neutronics model of the building housing the TCV tokamak has been developed. Predicted dose rates have been compared to neutron dose measurements at 12 locations in the building obtained during neutral beam injection into TCV plasmas. This ...
ELSEVIER SCIENCE SA2023Technical and economic feasibility study of high-current HTS bus bars for fusion reactors
Kamil Sedlák, Rainer Wesche, Roberto Guarino
In this study, we present a technical and economic assessment of high-current HTS bus bars for primary use in fusion reactors. Our objective is to verify the technical feasibility of such conductors and, for this purpose, we carry out a conceptual design o ...
ELSEVIER2022X-point radiation, its control and an ELM suppressed radiating regime at the ASDEX Upgrade tokamak
Marco Wischmeier, Bernhard Sieglin
Future fusion reactors require a safe, steady state divertor operation. The required detached operation is, in tokamaks with metal walls, usually achieved by seeding of impurities, such as nitrogen. With strong seeding levels, the dominant radiation is emi ...
IOP PUBLISHING LTD2021Multiphysics approach to plasma neutron source modelling at the JET tokamak
A novel multiphysics methodology for the computation of realistic plasma neutron sources has been developed. The method is based on state-of-the-art plasma transport and neutron spectrum calculations, coupled with a Monte Carlo neutron transport code, brid ...
IOP PUBLISHING LTD2019Improved neutron activation dosimetry for fusion
Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Alessandro Pau, Cristian Sommariva, Henri Weisen, Richard Pitts, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Federico Nespoli, Yao Zhou, David Pfefferlé, Davide Galassi, Antonio José Pereira de Figueiredo, Jonathan Marc Philippe Faustin, Liang Yao, Dalziel Joseph Wilson, Hamish William Patten, Samuel Lanthaler, Bernhard Sieglin, Otto Asunta
Neutron activation technique has been widely used for the monitoring of neutron fluence at the Joint European Torus (JET) whereas it is foreseen to be employed at future fusion plants, such as ITER and DEMO. Neutron activation provides a robust tool for th ...
2019Diamond Window Technology for Electron Cyclotron Heating and Current Drive: State of the Art
Nuclear fusion power plants require electron cyclotron (EC) heating and current drive (H&CD) systems for plasma heating and stabilization. High-power microwave beams between 1 and 2?MW generated by gyrotrons propagate in a dedicated waveguide transmission ...
TAYLOR & FRANCIS INC2019