Publication

Tungsten oxide-based photoanodes: biomass valorization and the effects of oxygen vacancies

Nukorn Plainpan
2023
EPFL thesis
Abstract

Tungsten oxide-based materials have unique and intriguing properties as photoanode materials for solar energy conversion. The first part of the thesis focuses on the use of WO3 photoanodes for the oxidation of 5-(hydroxymethyl)furfural (HMF). Chapter one lays down the general introduction to HMF oxidation and the unique properties of WO3 photoanodes. The direct oxidation (without any catalyst or a redox mediator) of HMF on WO3 photoanode is presented in chapter two. WO3 indeed shows activity toward the oxidation of HMF, but the product yield is very subtle. A kinetic model is developed and applied to the system to gain insight into the selectivity of HMF oxidation on the surface of WO3. Faster kinetics of the competing reactions have been found to be the main culprit for the low yield. In chapter three, the development of an analysis technique to predict the selectivity between the competing reactions in the photoelectrochemical cells as the function of applied potential is discussed. The analysis is based on derivative voltammetry and can predict the selectivity using only the information from the linear sweep voltammogram. For the oxidation of HMF on WO3, the analysis predicts the selectivity between the HMF oxidation and the competing water oxidation reaction, but the yield for the product yield remains unchanged regardless of the applied potential. To address this challenge, electrocatalysts are introduced to the surface of WO3. The effects of electrocatalysts are laid down in chapter four. Finally, in chapter five, the work is expanded to CuWO4. This ternary metal oxide retains many properties of WO3 but with a smaller band gap, allowing this material to harvest a larger proportion of the solar radiation. The investigation is be based on the effects of oxygen vacancy (OV), a common dopant for metal oxides. Many studies have shown that a small number of this dopant help improve the photocurrent while the excess poses detrimental effects. Nevertheless, the effort to understand the effect of OV on the photocurrent has been unequally given to the benefits side. The reason for the adverse effect posts by the excess OV is rarely discussed. In this chapter, the effect of the number of OVs on the parameters that affect the photocurrent in CuWO4 are discussed. To conclude this thesis presents the case for the use of tungsten oxide-based materials for solar energy conversion and gives a future outlook.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (32)
Photoelectrochemical cell
A "photoelectrochemical cell" is one of two distinct classes of device. The first produces electrical energy similarly to a dye-sensitized photovoltaic cell, which meets the standard definition of a photovoltaic cell. The second is a photoelectrolytic cell, that is, a device which uses light incident on a photosensitizer, semiconductor, or aqueous metal immersed in an electrolytic solution to directly cause a chemical reaction, for example to produce hydrogen via the electrolysis of water.
Timeline of solar cells
In the 19th century, it was observed that the sunlight striking certain materials generates detectable electric current – the photoelectric effect. This discovery laid the foundation for solar cells. Solar cells have gone on to be used in many applications. They have historically been used in situations where electrical power from the grid was unavailable. As the invention was brought out it made solar cells as a prominent utilization for power generation for satellites.
Oxide
An oxide (ˈɒksaɪd) is a chemical compound containing at least one oxygen atom and one other element in its chemical formula. "Oxide" itself is the dianion (anion bearing a net charge of –2) of oxygen, an O2– ion with oxygen in the oxidation state of −2. Most of the Earth's crust consists of oxides. Even materials considered pure elements often develop an oxide coating. For example, aluminium foil develops a thin skin of (called a passivation layer) that protects the foil from further oxidation.
Show more
Related publications (37)

High-throughput parallel testing of ten photoelectrochemical cells for water splitting: case study on the effects of temperature in hematite photoanodes

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora, Roberto Valenza

High-throughput testing of photoelectrochemical cells and materials under well-defined operating conditions can accelerate the discovery of new semiconducting materials, the characterization of the phenomena occurring at the semiconductor-electrolyte inter ...
Royal Soc Chemistry2024

Photoelectrochemical Cell Engineering for Solar Energy Conversion

Dan Zhang

Solar energy is the most abundant energy source, harnessing solar energy holds the solution to the challenge of increasing global energy demand and reducing our dependence on fossil fuels. Photovoltaics which directly convert solar energy into electricity ...
EPFL2023

Derivative voltammetry: a simple tool to probe reaction selectivity in photoelectrochemical cells

Kevin Sivula, Florent Alexandre Boudoire, Nukorn Plainpan

We demonstrate the use of the derivative voltammogram method to predict the selectivity of the photo-driven oxidation of 5-hydroxymethylfurfural (HMF) on a WO3 photoanode as a function of applied potential using only information obtained from the linear sw ...
2022
Show more
Related MOOCs (3)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Water quality and the biogeochemical engine
Learn about how the quality of water is a direct result of complex bio-geo-chemical interactions, and about how to use these processes to mitigate water quality issues.
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.