Experimental study of the hydrodynamic and thermal performances of ventilated wall structures
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Improving the energy efficiency of cooling systems can contribute to reduce the emission of greenhouse gases. Currently, most microelectronic applications are air-cooled. Switching to two-phase cooling systems would decrease power consumption and allow for ...
The behavior of a pile subjected to thermo-mechanical loadings was studied in situ with the aim of quantifying the thermal influence on the bearing capacity of heat exchanger piles. A pile situated in a building under construction was equipped with a chann ...
In previous research we have demonstrated a micro thermomechanical pyroelectric generator (mu TMPG) as an alternative to thermoelectric generators to harvest ambient heat energy. In such a device, a thermal mass oscillates between a hot and a cold side by ...
Model composite plates composed of highly conductive slender copper fibres impregnated with a poorly conductive and transparent PMMA matrix were processed with different fibrous architectures, i.e. with various controlled fibre contents and orientations. T ...
Although constant technology scaling has resulted in considerable benefits, smaller device dimensions, higher operating temperatures and electric fields have also contributed to faster device aging due to wearout. Not only does this result in the shortenin ...
Experimental condensation heat transfer data for the new refrigerant R1234ze(E), trans-1,3,3,3-tetrafluoropropene, are presented and compared with refrigerants R134a and R236fa for a vertically aligned, aluminum multi-port tube. Local condensation heat tra ...
This investigation examines experimentally the effect of stators on the performance curves and the heat transfer capabilities of small axial cooling fans. The experimental data indicated that the results are highly affected by the flow conditions at the fa ...
Variability of the internal friction angle with temperature is studied in a boundary value problem numerically simulating the impact of a cylindrical heat source on the stress and strain in soil mass in which it is emplaced. Even if the thermal increase of ...
International Center for Computational Engineering (IC2E)2011
The Nucleus Pulposus (NP) is an avascular tissue that may be subject to temperature increase. Indeed, since the NP is not perfused by the cardio-vascular system, it implies that heat cannot be convected from it. The sources of heat could be either external ...
Two pairs of identical experimentation modules are being developed within the framework of a collaborative initiative named NOMAD – Network of Optimization Modalities in Architectural Design - between the Interdisciplinary Laboratory of Performance-Integra ...
