The design and development of anion exchange membranes for hydrogen fuel cells
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Ni-YSZ anode supports show a fundamentally different microstructure from screenprinted Ni-YSZ anodes on YSZ electrolyte supports. Of high density and composed of fine zirconia and nickel oxide to allow for cofiring with a thin zirconia electrolyte film (5 ...
To increase power density at reduced temperature operation of SOFC, thin film 8YSZ electrolytes were deposited on Ni-YSZ anode support plates by tape casting and cofiring. Cathode behaviour, limiting cell output at lower temperature, was studied in more de ...
The aim of this work was to operate the steam reforming of methanol and the total oxidation of methanol in a microstructured two-passage reactor. The steam reforming enables the production of hydrogen at relatively low temperatures (250 °C) with only a sma ...
The use of ammonia as a source of hydrogen for fuel cells has received little attention until now. Ammonia offers several advantages over hydrogen as a fuel and is produced commercially in massive quantities and as a biogas. This paper describes the result ...
Fundamental and phenomenological models for cells, stacks, and complete systems of PEFC and SOFC are reviewed and their predictive power is assessed by comparing model simulations against experiments. Computationally efficient models suited for engineering ...
Progress on anode supported cell stacks (SOFCONNEX design, 50 m2 per cell) is presented. A 6-cell stack and a 8 cell-stack were mounted and tested with hydrogen fuel at 800 degre C, yielding 100 W el and 140 W el, corresponding to a power density of 1kW el ...
Polymer electrolyte and solid oxide are the two fuel cell types (PEFC, SOFC) under development in Switzerland. The very distinct operating temperatures of 80 °C (PEFC) and 800–950 °C (SOFC) impose fundamentally different requirements upon the nature of the ...
Results concerning the coupling of the steam reforming and total oxidn. of methanol in a two-passage reactor are presented. A com. available copper-based catalyst is used for the steam reforming. For the total oxidn., a highly active cobalt oxide catalyst ...
