Atomic-Level and Surface Structure of Calcium Silicate Hydrate Nanofoils
Related publications (40)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Calcium silicate hydrate (C-S-H) is the main hydrate phase in Portland cements. Its composition
varies depending on the Ca/Si ratio and on the presence of other ions such as aluminium (called CA-
S-H) or alkalis.
This thesis aimed to study the compositi ...
This thesis investigates the replacement of Portland cement by addition of high amounts of calcined clays and limestone. Such ternary blends can become more ecological and economical binders to answer the worldwide housing shortage. It could be demonstrate ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
Some of the limitations of the model recently used by Nicoleau in a recent article [Accelerated growth of calcium silicate hydrates: experiments and simulations, Cement Concr. Res. 21 (2011) 1339 - 1348.] are discussed. (C) 2012 Elsevier Ltd. All rights re ...
The filler effect, due to the physical presence of mineral additions in cement, is mainly known to accelerate the hydration of the clinker component. Previously, this was attributed to the surface of the filler providing nucleation sites for C-S-H as there ...
High-performance concrete is sensitive to early-age cracking, mainly due to its rapidly-developing autogenous shrinkage. Autogenous shrinkage and internal relative humidity (RH) decrease are direct consequences of the emptying of capillary pores due to cem ...
Thermodynamic modeling is a versatile tool for predicting the chemical composition cement during the hydration of cement. The quality of the thermodynamic modeling depends directly on the quality and completeness of thermodynamic database used. One of the ...
The main product of Portland cement hydration is C-S-H. Despite constituting more than half of the volume of hydrated pastes and having an important role in strength development, very little is known about the factors that determine its morphology. To inve ...
Calcium silicate hydrate (C-S-H) was synthetized at 20 degrees C to investigate the effect of aluminium uptake (Al/Si = 0-0.33) in the presence and absence of alkalis on the composition and the solubility of a C-S-H with a Ca/Si equal to 1.0. C-S-H incorpo ...
H-1 nuclear magnetic resonance (NMR), supported by a measurement of the degree of hydration using X-ray diffraction, has been used to fully characterise the nano-scale porosity and composition of calcium-silicate-hydrate (C-S-H), the active component of ce ...