Electrospun zein incorporating phycocyanin and Spirulina extract: Fabrication, characterization, and potential application
Related publications (32)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this paper we investigate the effect of microstructure irregularities and applied strain on backward Brillouin scattering by comparing two photonic crystal fibers drawn with different parameters in order to minimize diameter and microstructure fluctuati ...
We present a prototype for the first tracking detector consisting of 250 mu m thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10 mm Rohacell f ...
Unsaturated Polyester (UP) resins are extensively used as a matrix for the production of composites due to their low cost and versatility. Their significant polymerization shrinkage has however a negative impact on the dimensional stability of the molded p ...
Electrical resistance in carbon-fiber reinforced polymers has been shown experimentally to be a sensitive measure of internal damage. To quantify the dependence of electrical resistance on mechanical fiber damage at the micromechanical level, a numerical e ...
This paper examines the mechanisms by which a polymer is dispersed in a co-rotating twin-screw extruder. An experimental investigation of the morphological evolution has been carried out on a 45-mm co-rotating twin-screw extruder. Polyethylene/polystyrene ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...
Stress changes in hydrogenated phosphorous-doped fibers after Bragg grating inscription have been measured. Fibers with three different drawing tensions have been investigated. The core stress was found to increase independently of the initial stress state ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Mechanical and fracture behaviors of wood are defined by the morphology and mechanical properties of wood fibers and their bonding medium. Parallel orientation of wood fibers makes them the most influential microstructural elements from the mechanical poin ...
A study of the microstructure developing at the surface of glass fibers in a poly(vinyl acetate) (PVAc)/polyester blend is presented. Three different experimental methods are used: a technique based on the Wilhelmy method to measure the wettability of the ...