Atomic level insight into irradiation effects in nuclear fuel materials
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The paper describes the source term estimation of CROCUS, the zero power research reactor of EPFL, to be used for dispersion analysis under accidental conditions. To fulfil regulatory requirements, the source term of the CROCUS fuel is estimated through Mo ...
Short chain carbon-14 (C-14) containing organic compounds can be formed by abiotic oxidation of carbides and impurities within nuclear fuel cladding. During fuel reprocessing and subsequent waste storage there is potential for these organic compounds to en ...
Simulations of nuclear reactor physics can disagree significantly from experimental evidence, even when the most accurate models are used. An important part of this bias from experiment is caused by nuclear data. The nuclear data have inherent uncertaintie ...
Previous studies on the modelling of coupled thermo-hydro-mechanical (THM) processes in bentonite-based engineered barrier systems (EBSs) showed the sensitivity of the output quantities to changes in the input parameters. To investigate the effects of unce ...
This paper presents the methodology applied for the experimental and numerical investigation of the mechanical response of spent nuclear fuel rods under static and dynamic loads. The experimental activities were conducted at the JRC Karlsruhe where a 3-poi ...
This thesis presents a systematic study on the merits and limitations on using pin-by-pin resolution and transport theory based approaches for nuclear core design calculations. Starting from the lattice codes and an optimal cross section generation scheme, ...
The reactivity loss of PWR fuel with burnup has been investigated experimentally by measuring the reactivity worths of highly-burnt fuel samples in a PWR test lattice in the framework of the LWR-PROTEUS Phase II program. Seven UO2 samples cut from fuel rod ...
Internal gelation and 3D printing processes were proposed to combine in a process that is promising to produce nuclear fuels with simplified production route and enhanced in-core performance [1]. The process relies on in-situ mixing of feed solutions that ...
Recent LOCA tests with high burnup fuel at the OECD Halden Reactor Project and at Studsvik demonstrated the susceptibility of the fuel to fragment to small pieces, to relocate and possibly cause a hot-spot effect and to be dispersed in the event of claddin ...
A new 3D fuel behavior solver is currently under collaborative development at the Laboratory for Reactor Physics and Systems Behaviour of the Ecole Polytechnique Federale de Lausanne and at the Paul Scherrer Institut. The long term objective is to enable a ...