A 5G n77 Filter Using Shear Bulk Mode Resonator With Crystalline X-cut Lithium Niobate Films
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The increasing demand of higher frequencies technologies in RF (Radio frequency) components, especially for telecommunication, create a need to develop wider and higher frequency bands filters, with optimal performances. Thus, constant effort are made to d ...
This report presents the characterization of singly-clamped and doubly-clamped resonator devices. Resistance tests were performed to ensure adequate top-to-bottom insulation, allowing the characterization work to proceed. The piezoelectric characteristics ...
2023
,
This work reports on the design and fabrication of fundamental shear horizontal (SH0) mode acoustic resonators based on a suspended lithium niobate (LNO) film at 1.04 GHz. Due to the large e16 piezoelectric coefficient of YX36 degrees.-cut LNO, fabricated ...
RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...
EPFL2022
, ,
The recently invented laterally excited bulk wave resonators (XBARs) demonstrate outstanding parameters suitable for the design of low loss filters for the fifth generation of mobile phones. The operation of XBARs can be interpreted as an excitation of ant ...
WILEY2021
, ,
There is a need for sensors capable operating at temperatures above 1000 degrees C. We describe an innovative sensor that might achieve this goal. The sensor comprises two main elements: a thermocouple and a surface acoustic wave (SAW) strain sensor. The c ...
Amer Inst Physics2017
, ,
This work presents the study of suspended Y-cut Lithium Niobate shear bulk acoustic resonators for wide band filter applications in the frequency range of 3.5-4.5GHz. The resonators consist of a Lithium Niobate film with Aluminum top interdigitated electro ...
This paper presents the use of a novel type of resonators made of a thin membrane of Y-cut Lithium Niobate that has an array of interdigitated electrodes on the top, and a floating metal on the bottom. Each electrode gives rise to a quasi-independent reson ...
Wave manipulation at a subwavelength scale has recently attracted significant interest, especially for low-frequency wave propagation, from acoustic to microwave devices. Recently, a few methods achieving subwavelength routing using locally resonant metama ...
Mobile communication has grown explosively in recent years, leading to a strong demand for cheap, but high-performing bandpass filters with low insertion loss and smaller size. Surface acoustic wave (SAW) and thin film bulk acoustic wave (BAW) resonators r ...
