Développement de réacteurs microstructurés pour la conversion du propane en produits valorisés
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The aim of this work was to operate the steam reforming of methanol and the total oxidation of methanol in a microstructured two-passage reactor. The steam reforming enables the production of hydrogen at relatively low temperatures (250 °C) with only a sma ...
Disinfection of some microorganisms is characterized by a lag-phase (a minimum required ozone exposure until disinfection occurs). This phenomenon is easy to model in laboratory batch reactors but not in continuous flow mixed reactors. This paper introduce ...
The use of filamentous catalysts for innovative design of chemical reactors with structured catalytic beds is discussed in detail. The fluid dynamics attained in such reactors avoid transport limitations (mixing or heat- and mass-transfer) and increase rea ...
For many years, calorimetry has been recognized as a powerful and universal tool for monitoring chem. and biol. processes. A lab.-scale reaction calorimeter (RC1, Mettler-Toledo), initially developed for chem. reaction studies with a sensitivity of 100-150 ...
The experimentally observed rise in the single pass methanol production with CO2 and H-2 (T = 200 degreesC, P = 4.3 bar) by in situ product removal over a perm-selective Nafion (R) membrane is verified by model simulations. For this purpose, software was d ...
In batch chemical processing, dynamic optimization is the method of choice to reduce production costs while satisfying safety constraints and product specifications. Most of the standard optimization techniques are based on a model of the process, while it ...
Dense planar and tubular oxygen separation membranes of La 0.6Ca0.4Fe0.75Co0.25O3-d were investigated as reactors for the partial oxidation (POX) of methane to syngas. Disk-shaped membranes were prepared by compaction and tubes by extrusion. Their permeati ...
In small area capacitive reactors, the rf and dc components of the plasma potential can be assumed to be uniform over all the plasma bulk because of the low plasma resistivity. In large area reactors, however, the rf plasma potential can vary over a long r ...
The content of this report is property of HTceramix and subject to restrictive distribution The goal of the project "Oxygen membranes for the partial oxidation of natural gas" was the pre-industrial evaluation of the concept of an electroceramic reactor, c ...
Theor. anal. of the reactor performance under unsteady-state conditions was carried out. The reactions are described by two kinetic models, which involve the participation in catalytic reaction of two types of active sites. The kinetic model I assumes the ...
