Consolidation and deconsolidation in composite processing
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The frequency dependence of seismic properties of fully saturated rocks can be related to wave-induced fluid flows at different scales. The elastic dispersion and attenuation of four fluid-saturated carbonate rocks, with different microstructures, have bee ...
Shales are involved in energy-related applications such as the extraction of shale gas, the CO2 storage and the nuclear waste disposal. In these contexts, fundamental issues come along with the multiphysical conditions in which shales are found, where mech ...
Fiber-based elements are commonly used to simulate steel beam-columns because of their ability to capture P-M interactions and spread of plasticity. However, when mechanisms such as local buckling result in effective softening at the fiber scale, conventio ...
Chemical sensing using optical fibers is often challenging, as it is generally difficult to achieve strong interaction between the guided light and the analyte at the wavelength of interest for performing the detection. Despite this difficulty, many scheme ...
Previous studies and field surveys showed that specific structural designs can decrease the load on free-standing buildings along the coast, providing safer vertical shelters. This experimental study investigated the effect of openings in buildings (window ...
There is a growing interest in exploring novel material combinations and processing technology to manufacture complex 3D shaped polymer and composite structures. In the field of prosthetics and orthotics, this need is significant with additional challenges ...
Fibre Reinforced Polymer (FRP) composite structures are subjected during service to low energy impacts or unexpected loads, leading to damage. Microcracks are generally first formed in the matrix and can reach up to several hundred microns in thickness. In ...
Elastic properties of gas shales are of utmost importance for the exploitation of shale gas reservoirs. Static elastic properties are usually measured by performing unloading-reloading cycles in uniaxial or triaxial compressive tests. The response of gas s ...
The safe storage of CO2 in deep reservoir units requires an efficient sealing of the overlaying caprock. The acidic environment caused by the dissolution of CO2 into the pore fluid can induce changes in the microstructure of the material over the long term ...
A commercially available optical fiber coated with 8 µm-thickness polyimide is used for measuring the acoustic impedance of the surrounding liquid materials, by means of the generation and detection of forward stimulated Brillouin scattering (FSBS). ...
