Innovative standstill position detection combined with sensorless control of synchronous motors
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Usually, each phase of the direct reluctance motor is fed separately by its own inverter producing a squarewave phase current depending on the rotor position. In the present work, a star-connection of the three stator phases is used and the direct reluctan ...
In this paper, a method for sensorless position estimation of linear transducers at standstill is suggested. The method makes use of current pulses, which is a common sensorless starting technique for 3-phase synchronous motors. Most transducers possess ho ...
The Industrial Electronics Laboratory at the Swiss Federal Institute of Technology (EPFL) in Lausanne has built a prototype of a revolutionary two-wheeled vehicle. Due to its configuration with two coaxial wheels, each of which is coupled to a DC Motor, th ...
In many applications, industry has tried to develop sinusoidal supply for brushless DC (BLDC) motors. This paper describes a method that still keeps a simple 2 phases-on sensorless method and achieves sinusoidal supply, which is needed to avoid speed oscil ...
NOVELTY - After disconnection from normal control (3) a pulse generator (4) sends positive and negative pulses to a motor winding R. The response currents are measured (5) from voltages (Vpr,Vnr) which appear after a fixed time on a neutral resistor (2) an ...
The number of brushless DC (BLDC) motor applications has increased significantly, essentially due to reduced costs of semiconductors and permanent magnets, but also because of the emergence of new control strategies, such as closed-loop and sensorless cont ...
In some applications, it is interesting to know the position of a BLDC Motor at standstill. This paper propose one solution using the saturation property of the motor. Principle, simulation and measures are presented. The results of industrial applications ...
When we achiev a good performance of the field-oriented vector control system, it is necessary to detect the speed and flux of the motor. Usually it is hard to implemment these sensors. Then the sensor-less contro-system techniques using the observer inste ...
The photogoniometer is composed of a computer-controlled movable mechanical support, presenting two main rotation axes that are powered by DC motors. It uses an accurate and reliable gear technology (harmonic drivers) and is controlled by a micro-computer. ...
Poling of lead zirconate titanate pyroelectric thin films has been studied. Poling temperature and electrical field were optimized to achieve high figures of merit. We have found a direct correlation between the onset of degradation current and the final p ...
