Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The article analyzes the influence of the Internet Protocol (IP) access interface on the packet loss probability and delay times in the optical packet switched network. The network and node model have been proposed, and the structure of the IP access inter ...
The article describes the philosophy of component approach to system design, illustrated on the optical transmission network example. The approach is based on the object oriented paradigms of Cosmos and Nyx tools. Cosmos serves as the support for system an ...
Fault identification and location in optical networks must cope with a multitude of factors: (i) the redundancy and the lack of coordination (internetworking) of the managements at the different layers (WDM, SDH/SONET, ATM, IP) ...
The upper limit of a network's capacity is its liquid throughput. The liquid throughput corresponds to the flow of a liquid in an equivalent network of pipes. However, the aggregate throughput of a collective communication pattern (traffic) scheduled accor ...
Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ 08855-1331, United States2004
The article analyzes the influence of the IP access interface on the packet loss probability and delay times in the optical packet switched network. The network and node model have been proposed, and the assembler and hold features have been included in th ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2004
This paper presents an approach for analyzing and modeling of gated-oscillator (GO) -based CDRs and predicting their performance aspects such as jitter tolerance (JTOL) and frequency tolerance (FTOL). It is shown that high JTOL of this topology in addition ...
Over the past decade a new family of optoelectronic devices has emerged whose performance is enhanced by placing the active device structure inside a Fabry–Perot resonantmicrocavity [P. E. Green, IEEE Spectrum 13 (2002)]. The increased optical field allows ...
For collective communications, the upper limit of a network's capacity is its liquid throughput. The liquid throughput corresponds to the flow of a liquid in an equivalent network of pipes. However, in communication networks, the aggregate throughput of a ...
Today, there is no doubt that optical networks are the solution to the explosion of Internet traffic that two decades ago we only dreamed about. They offer high capacity with the use of Wavelength Division Multiplexing (WDM) techniques among others. Howeve ...
The failure of a single optical link or node in a Wavelength Division Multiplexing (WDM) network may cause the simultaneous failure of several optical channels. In some cases, this simultaneity may make it impossible for the higher level (SONET or IP) to r ...
