Flow Boiling in Horizontal and Vertical Tubes: the Effect of Tube orientation on Heat Transfer.
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This article presents experimental results of heat transfer from two different studies [1, 2] for horizontal flow boiling inside smooth copper tubes with different refrigerants. The main goal of this study was to verify the influence of the saturation temp ...
The current industrial need for compact high heat density cooling devices has conveyed an increasing interest on convective boiling in micro-channels. Although there is general agreement that these systems may be able to dissipate potentially very high hea ...
The complexity of the two-phase flow in a tube bundle presents important problems in the design and understanding of the physical phenomena taking place. The working conditions of an evaporator depend largely on the dynamics of the two-phase flow that in t ...
Experimental pressure drop results on boiling water flow through three helical coils of tube inner diameter of 4.03 mm and 4.98 mm and coil diameter to tube diameter ratio of 26.1, 64.1 and 93.3 are presented. Both subcooled and saturated flow boiling are ...
A new optical void fraction measurement system has been coupled to the existing LTCM flow boiling test facility to obtain dynamic and time-averaged void fractions, simultaneously with measurements of the local heat transfer coefficients. A series of evapor ...
A new falling film heat transfer test facility has been built for the measurement of local heat transfer coefficients on a vertical array of horizontal tubes, including flow visualization capabilities, for use with refrigerants. Presently, the facility has ...
This study is a contribution for the improvement of horizontal falling film heat exchangers. This type of evaporator has the potential to be widely used in the petrochemical industry, for the sea water desalination, or in the large refrigeration systems. A ...
An improved two-phase flow pattern map is proposed for evaporation in horizontal tubes. Based on new flow pattern data for three different refrigerants covering a wide range of mass velocities, vapor qualities and heat fluxes. The new flow pattern map incl ...
The substitution of CFC refrigerants in refrigeration systems, heat pumps and organic Rankine cycles, requests a good knowledge of the heat transfer and pressure drop properties of substitute fluids. A contribution to this international effort is proposed ...
An extensive database has been collected for the evaporation of two hydrofluorocarbon refrigerants (HFC- 134a and the zeotropic mixture HFC- 407C) and the natural refrigerant ammonia (R-717). A model to predict the onset of nucleate boiling has been succes ...
