Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A new falling film heat transfer test facility has been built for the measurement of local heat transfer coefficients on a vertical array of horizontal tubes, including flow visualization capabilities, for use with refrigerants. Presently, the facility has ...
The current industrial need for compact high heat density cooling devices has conveyed an increasing interest on convective boiling in micro-channels. Although there is general agreement that these systems may be able to dissipate potentially very high hea ...
A new optical void fraction measurement system has been coupled to the existing LTCM flow boiling test facility to obtain dynamic and time-averaged void fractions, simultaneously with measurements of the local heat transfer coefficients. A series of evapor ...
The substitution of CFC refrigerants in refrigeration systems, heat pumps and organic Rankine cycles, requests a good knowledge of the heat transfer and pressure drop properties of substitute fluids. A contribution to this international effort is proposed ...
This study is a contribution for the improvement of horizontal falling film heat exchangers. This type of evaporator has the potential to be widely used in the petrochemical industry, for the sea water desalination, or in the large refrigeration systems. A ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200 and 300 kg/m2s (73500, 147000 an ...
Few experimental test data are available for evaporation of ammonia inside tubes and numerous new data have been measured and presented here. An improved approach to the prediction of flow boiling heat transfer in horizontal tubes has been proposed through ...
Some basic ideas of the heat transfer of ice slurries are discussed. The equations des-cribing a flow of a Bingham fluid through a tube with a heat flux over the boundary are presented. The theory shows that familiar Relations known in the field of heat ex ...
International Institute of Refrigeration IIR-IIF1999
Experimental test results for flow boiling of pure ammonia inside horizontal tubes were obtained for a plain tube and a microfin tube. Tests were run at a nominal saturation temperature of 4°C, mass velocities from 20-140 kg/m2s, vapor qualities from 1-99% ...
After an experimental study of refrigerants HFC-134a, HCFC-123, HFC- 404A and HFC-407C, and considerable modifications to the test stand, LENI has undertaken a new experimental program and has assembled a large new database for evaporation of ammonia and t ...
