Decentralized production in urban systems, the vision of the Institute of Energy Sciences of EPFL

In 1998, the Board of the Swiss Federal Institute of Technology established the challenging vision of the 2000 W society. The goal is to reach, for Switzerland by the year 2050, an energy intensity target of 2000 Wyear/year/cap. Referring to a present intensity of 5000 W year/year/cap, this means an expected factor 4 reduction of the intensity. For the Swiss Federal Institute of Technology, the challenge is to contribute to this target by its Research and Development activities. In the Ecole Polytechnique Fédérale de Lausanne (EPFL), the Institute of Energy Sciences (ISE) of the School of Engineering (STI) is a group of research laboratories that has committed to contribute to this target in the field of efficient conversion and distribution of energy. Decentralised production of electricity in urban areas is one of the multidisciplinary headlight projects that has been selected to reach the 2000 W target. Decentralised production is considered as a way of producing the energy services required by a community in an integrated approach allowing for polygeneration of heating, cooling, refrigeration and electricity services. This new systemic approach requires a new vision where several networks that have to be operated simultaneously. Electricity has to be distributed through microgrids connected with the major grids. In this field, the laboratories from electrical engineering are developing new tools for the design and the operation of such grids as well as new equipments that guarantee the safe operation of the system and its power quality. The design of district heating networks and their integration with the energy services requirements is a complex task since the demands vary with the seasons, the hours of the day and are by nature stochastic due to the behavior of the inhabitants and the weather conditions. Furthermore, the profitability and the conversion efficiency of such systems mainly rely on the appropriate system design, i.e. the size of the piping and the equipments, as well as on its optimal management. Applying techniques such as thermo-economic modeling, process integration , exergy analysis and multi-objective optimisation, the Laboratory for Industrial Energy Systems (LENI) develops computer aided design methods for helping the different stakeholders (energy services companies, technology developers, final users, policy makers) in defining the most appropriate investments both from the side of the infrastructure and the energy conversion equipments and also from the optimal operation management side in order to place the technologies in the energy market context. The Laboratories of the Energy Sciences Institute also work on the development of new equipments for advanced energy conversion, such as high speed turbocompressors for heat pumping, solid oxide fuel cells (SOFC) and cogeneration concepts combining SOFC and gas turbines. Within the Institute, this advanced R&D effort is performed in a multidisciplinary approach combining experimental work with multi-scale multi-physics computer aided design tools like CFD and optimisation.

Multi-objective design and optimization of district energy systems including polygeneration energy conversion technologies

Céline Weber

In the present context of finding ways to decrease CO2 emissions linked with human activity, district energy systems including polygeneration energy conversion technologies are likely to play a major role. District energy systems meet the heating, hot water, cooling and electricity requirements of a district. Because they meet several types of energy requirements, and for more than one single building, district energy systems represent good opportunities to implement polygeneration energy conversion technologies. Polygeneration energy conversion technologies indeed provide different energy services simultaneously, helping to decrease the CO2 intensity compared to energy conversion technologies that meet only one energy service. Moreover, when providing energy to a whole district, polygeneration energy conversion technologies can take advantage of the various load profiles of the buildings by compensating the fluctuations and having therefore a smoother operation. A district energy system comprises essentially two parts: the plant with the polygeneration energy conversion technologies, and the distribution networks (heating and cooling). When designing the energy system for a district, one has therefore to define which type of polygeneration energy conversion technologies are best suited for the district, as well as which building are worse connecting to the system and which buildings shouldn't be connected (for instance if they are located too far away from the other buildings or if they have too small requirements to justify a connection from the plant). Moreover the operation strategy needs to be defined. In the present thesis, a method is developed that helps designing and optimizing district energy systems, from the structuring of the information available for the district (energy consumption profiles, location of the buildings, available energy sources, possible layouts for the pipes,...), over the thermo-economic modelling of the energy conversion technologies, the design of the network and the simulation of its operation strategy, and finally the evaluation of the results in terms of CO2 emissions and costs. The design and optimization of the district energy system is a multi-objective Mixed Integer Non Linear Programming problem. To solve this problem, a decomposition strategy including a master and a slave problem was developed. The master optimization problem takes care of the energy conversion technologies, whereas the slave optimization problem optimizes the network part. The two sub-problems are solved iteratively and result in the definition of a Pareto optimal curve that gives the trade-offs between the emissions and the costs for various configurations satisfying the requirements of the district. A configuration is characterized by given types and sizes of energy conversion technologies, their location in the district, the network layout, as well as the operation strategy of the technologies. Due to the time dependent energy consumption profiles and the geographical location of the buildings and plant, the method developed combines two well known types of problems, namely the multi-period optimization problems and the network problems. The method developed allows to take into account various constraints such as limited availability of energy sources, forbidden connections between buildings (for instance if a large river separates these two buildings), or else space limitations in underground technical channels. The capabilities of the method are demonstrated by means of a test case, as well as a real case in the Canton of Geneva. The results show the importance of considering all the energy services together (and not separately). Energy systems including a gas engine or a gas turbine combined cycle, together with heat pumps, indeed help decreasing both the emissions and the costs compared to the actual configurations. In the Geneva case study for instance, emissions can be decreased by up to 45%, with a simultaneous costs reduction of 24%. However, the method only deals with water networks, while in some cases space limitations and safety issues make the use of water impossible. A new type of district energy system based on CO2 as energy transfer medium (instead of water), is therefore developed in order to take such issues into account. This new system, that led to the submission of a patent, meets all the different types of energy requirements with only two pipes (instead of three or four like in conventional water based system), and uses the latent heat of CO2 as driving force, instead of the specific heat.

EPFL2008

Thermo-Economic Optimisation of Solar Tower Thermal Power Plants

James Spelling

Amidst a backdrop of rapidly increasing world-wide electricity demand, solar thermal power generation shows great potential for supplying the electricity needs of numerous countries in the Sun-belt regions of the world. In these regions, the absence of significant biomass, hydrological or geothermal reserves makes solar thermal power the most promising solution for meeting that most fundamental of demands: energy. Amidst the different options available for harnessing the Sun’s power, solar thermal technologies have been shown capable of producing electricity at the most economically viable rates [32]. However, all currently existing solar thermal power plants have been based around the use of Rankine, or steam turbine, cycles which are limited in the efficiencies they can achieve. In order to make better use of the Sun’s energy, higher efficiency cycles should be used. With their high concentration ratios, solar thermal power tower systems are amongst the best options for making use of the Sun’s potential. As the energy delivery temperature of central receiver systems is higher, they harness the solar radiation at a higher exergy level [4]. This higher temperature also opens the road to the use of more advanced thermodynamic cycles. Hybrid fossil-fuel – solar systems are also imaginable [13], as the energy delivery temperature is compatible with standard gas turbine cycles. Hybrid systems can help mitigate the requirements of thermal energy storage, as well as reducing the perceived risk when investing in new solar technology, which stimulates research and development, as well as providing employment. Recent developments in the field of high temperature volumetric receivers [10] along with rock- based packed-bed storage systems have opened up an interesting possibility. High temperature receivers allow the use of higher-efficiency combined-cycle setups, whereas packed-bed units offer the possibility of cheap storage. Larger storage volumes allow pure-solar systems to extend their power production into the night, making hybrid options less attractive. This is compounded by the common practice of guaranteeing a preferred tariff for electricity sales from pure-solar sources With this in mind, a complete dynamic model of a power plant based on the pure-solar concept has been elaborated. The performance of the setup is evaluated over a range of days, using solar insolation profiles obtained from satellite data. In order to examine different design options and their impact on the performance of the power plant, a multi-objective, thermo-economic optimisation of both the power plant superstructure and operating conditions was performed using the new, dynamic models. By means of an evolutionary algorithm [17], a family of Pareto-optimal points were obtained, representing the trade-off between increased power plant efficiency, and lower levelised energy costs. Through use of optimisation, it was shown that exergetic efficiencies in the region of 21-27% can be achieved, for relatively low power outputs of between 3 and 11 MWe. These configurations correspond with levelised electricity costs in the region of 14-21 UScts/kWhe. In most regions, the use of solar power is encouraged by the guarantee of a preferential tariff for electricity sales from renewable sources. Sale of electricity at a price of around 24 UScts/kWhe [32] should therefore be imaginable, ensuring the economic viability of solar thermal power tower systems. It can be concluded that, when properly designed, solar thermal power plants based on combined cycles are both economically and thermodynamically promising. By raising the efficiency of the plant, the size of the solar collector field is diminished, increasing the otherwise low energy densities of solar power systems. By reducing the levelised electricity costs, solar thermal power plants become more economically viable, accelerating their construction and thus, hopefully, reducing our dependence on fossil-fuels.

2009

Thermo-Economic Optimisation of Solar Tower Thermal Power Plants

James Spelling

2009

Multi-objective design and optimization of district energy systems including polygeneration energy conversion technologies

Céline Weber

EPFL2008