Microfabrication of ceramic components by microstereolithography
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The present thesis deals with new composite photoresists for the UV-LIGA and microstereolithography microfabrication processes. The aim is to build functional 3D objects, with high aspect ratio. Two projects have been investigated in parallel for each micr ...
Dendritic hyperbranched polymers have been shown to be able to double the interlaminar fracture resistance of epoxy-based composites and to reduce the internal stress level by as much as 80% with only 10 phr of modifier. These property improvements were ob ...
Interfaces in metal and ceramic composites differ from interfaces in polymer matrix composites inasmuch as: (i) fiber degradation due to chemical reaction with the matrix at processing temperatures is frequent and (ii) bonding at the interface is generally ...
This paper describes new polymer/ceramic photosensitive resins that can be used in the microstereolithography process for manufacturing complex 3D components in composite material. These new resins contain high loads (up to 80 wt.%) of alumina nanoparticle ...
This dissertation addresses the development of a Solid Freeform Fabrication process, Selective Laser Pyrolysis, to fabricate three-dimensional porous ceramic preforms from ceramic powders and preceramic polymers. It contributes to a better understanding of ...
Microstereolithography is a technology at the interface of the microengineering and rapid prototyping domains. It has evolved from the stereolithography technique, and is also based on a light-induced layer- stacking manufacturing, As the resolution of the ...
Fiber push-out tests have been performed on a ceramic matrix composite consisting of Carborundum sintered SiC fibers, with a BN coating, embedded in a reaction-bonded SiC matrix. Analysis of the push-out data, utilizing the most complete theory presently a ...
We present a method for modeling and animating a wide spectrum of volumetric objects, with material properties anywhere in the range from stiff elastic to highly plastic. Both the volume and the surface representation are point based, which allows arbitrar ...
In this paper, a new microstereolithography apparatus is described. It is an integral process in which a complete layer can be made in one exposure only, in contrast to vector-by-vector processes which are based on the vectorial tracing of each layer. As f ...
