Correlation between oxygen transport properties and microstructure in La<sub>0.5</sub>Sr<sub>0.5</sub>FeO<sub>3-δ</sub>
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The effect of the bulk microstructure (grain size distribution, grain boundary length) on the oxygen transport properties of permeation membranes is investigated in this work. For this purpose, La0.5Sr0.5FeO3-? samples with different microstructures have b ...
The exact mechanism of creep resistance enhancement due to yttrium (Y) doping in a-alumina is still subject to speculation, although it is known that dopants segregate strongly to grain boundaries. The current work applies atomistic simulation techniques t ...
Nanostructured materials should present a good resistance to irradiation because the large volume fraction of grain boundaries can be an important sink for radiation-induced defects. The objective of the present study is to experimentally investigate the i ...
The motivation of this work derives from the need of the cutting tool industry to improve its products in order to support harder and harder working conditions, namely increasing cutting speeds and working on stronger modern materials. The lifetime of the ...
Selection of α variants is often reported in thermomechanically processed titanium alloys. Many workers have noticed that α variants are frequently situated at the grain boundary between β grains that share a common {1 1 0}β plane, but up to now such coinc ...
Isothermal NaCl sintering experiments are conducted between 500 and 790 degrees C on powders 75, 100, 150 and 400 mu m in average diameter. Along with literature data, the results are compared with theoretical predictions for the initial stage of sintering ...
Tensile properties and microstructure of Danocrystalline electrodeposited Ni at temperatures between room temperature and 330&DEG; C are presented. Above 300&DEG; C low flow stress and high tensile elongation are observed along with grain growth and segreg ...
The prediction of material microstructure is of great interest to the material designers since the property and performance of materials depend strongly on their microstructures. In this work, a Monte Carlo approach is used to investigate the normal grain ...
We present an atomistic study of the plastic deformation mechanisms occurring in columnar structures of nanocrystalline Ni, with particular emphasis on the process of dislocation emission form the grain boundaries. The samples are constructed with grain bo ...
Materials consisting of grains or crystallites with sizes below a hundred nanometers have exhibited unique physical and mechanical properties in comparison to their coarse-grained counterparts. As a result, considerable effort has been put into uncovering ...
