Modeling of ingot distortions during direct chill casting of aluminum alloys
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Reduction of the specific fuel consumption of gas turbines can be achieved by maximizing the turbine inlet temperature. However, this requires a detailed understanding of the cooling performance in order to ensure safe and economical operation of the engin ...
Based on temperature-dependent thermo-physical property models developed previously, a one-dimensional model was proposed to predict the thermal responses of FRP composites in time and space domain, up to high temperatures. An implicit finite differential ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Porosity is one of the major defects in castings because it reduces the mechanical properties of a cast piece [1]. Porosity formation results from the effect of two concomitant mechanisms, namely solidification shrinkage and segregation/precipitation of ga ...
[1] A numerical model was developed for the prediction of the density stratification of lakes and reservoirs. It combines a buoyancy-extended k-epsilon model with a seiche excitation and damping model to predict the diffusivity below the surface mixed laye ...
Our goal is to study the existence of weak solution for the stationary system of equations describing the solidification process of a binary alloy confined in a bounded regular domain in R-3 and having mixed boundary conditions. (c) 2005 Elsevier Ltd. All ...
Reconstruction algorithms for Optical Diffuse Tomography (ODT) rely heavily on fast and accurate forward models. Arbitrary geometries and boundary conditions need to be handled rigorously since they are the only input to the inverse problem. From this pers ...
Reconstruction algorithms for Optical Diffuse Tomography (ODT) rely heavily on fast and accurate forward models. Arbitrary geometries and boundary conditions need to be handled rigorously since they are the only input to the inverse problem. From this pers ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2008
This paper describes a new method to determine the equivalent transverse heat transfer coefficient between the helium flow in the cable bundle and the flow in the central space of a CICC's with parallel cooling channel. The method is based on the analysis ...
In an earlier contribution it was shown that the Continuous-Properties Model (CPM) is an ideal theoretical model to calculate melting of ice slurries. Now with a shock-theoretical approach, it is proven that the CPM - in the limit toward a discontinuous me ...
International Institute of Refrigeration IIR-IIF2001
