Home

Publication

Statistical analysis of the current-sharing temperature evolution in Nb3Sn cable-in-conduit-conductors for ITER

Related publications (26)

A design proposal for the European DEMO superconducting bus bars and current leads

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche, Roberto Guarino

The integration of the feeder system in a tokamak involves complex engineering, manufacturing and logistics issues. Therefore, within the pre-conceptual design activities of the European DEMO fusion reactor, it is important to provide a preliminary sizing ...

2021

Page 2 of 3

About
Privacy
Disclaimer

Graph Chatbot

Upgrade and Commissioning of the SULTAN Facility to Host Quench Experiments on HTS High Current Conductors

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Ortensia Dicuonzo

High Temperature Superconductors (HTS) are promising materials for future fusion magnets. One of HTS conductors' main issues is the quench protection: the quench develops much slower than in LTS, delaying the quench detection by voltage monitoring and caus ...

IEEE Institute of Electrical and Electronics Engineers2021

A design proposal for the European DEMO superconducting bus bars and current leads

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche, Roberto Guarino

2021

Analysis of the effects of thermal anchors on the reduction of the parasitic load to the EU-DEMO TF coils

Kamil Sedlák

The design of the superconducting magnet system of the EU-DEMO tokamak reached the end of the preconceptual design phase, and a careful investigation of the parasitic heat load from the room-temperature environment is needed. A possible route for the paras ...

2021

Updates on Magnet Design For EU-DEMO Reactor: Optimization Studies on TF and CS Systems

Kamil Sedlák

In the framework of EU design activities for dimensioning the future fusion DEMOnstration reactor (DEMO), extensive analyses were conducted in EUROfusion context, aiming at ultimately defining the design of the DEMO magnets system. In this objective CEA (C ...

IEEE Institute of Electrical and Electronics Engineers2021

Edge turbulence in ISTTOK: a multi-code fluid validation

Paolo Ricci, Davide Galassi, Fabio Riva, Rogério Manuel Cabete De Jesus Jorge, Eric Serre

Fluid models used to study the edge plasma region need to be benchmarked against similar conditions given that models can strongly differ in complexity and therefore the results they produce. Via this validation study undertaken through the framework of EU ...

2021

A Pareto Dominance Principle for Data-Driven Optimization

Daniel Kuhn, Tobias Sutter

We propose a statistically optimal approach to construct data-driven decisions for stochastic optimization problems. Fundamentally, a data-driven decision is simply a function that maps the available training data to a feasible action. It can always be exp ...

2024

A statistical approach for the automatic identification of the start of the chain of events leading to the disruptions at JET

Alessandro Pau

This paper reports an algorithm to automatically identify the chain of events leading to a disruption, evaluating the so-called reference warning time. This time separates the plasma current flat-top of each disrupted discharge into two parts: a non-disrup ...

IOP Publishing Ltd2021

Development of free-boundary equilibrium and transport solvers for simulation and real-time interpretation of tokamak experiments

Francesco Carpanese

To exploit fusion as a source of energy, a hot and dense confined plasma is needed. This is achieved in tokamaks by actively controlling the plasma state meaning shape, position and internal kinetic profiles. This thesis addresses two topics: the developme ...

EPFL2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

Multivariate extremes over a random number of observations

Simone Padoan, Stefano Rizzelli

The classical multivariate extreme-value theory concerns the modeling of extremes in a multivariate random sample, suggesting the use of max-stable distributions. In this work, the classical theory is extended to the case where aggregated data, such as max ...

WILEY2021

Page 2 of 3

Updates on Magnet Design For EU-DEMO Reactor: Optimization Studies on TF and CS Systems

Kamil Sedlák

IEEE Institute of Electrical and Electronics Engineers2021

A statistical approach for the automatic identification of the start of the chain of events leading to the disruptions at JET

Alessandro Pau

IOP Publishing Ltd2021

Development of free-boundary equilibrium and transport solvers for simulation and real-time interpretation of tokamak experiments

Francesco Carpanese

EPFL2021