Electrochemical promotion of catalysts for gas phase reactions
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Cyclic voltammetry was used for the electrochemical study of a Ni thin film (similar to 880 nm) deposited on an yttria-stabilized zirconia (YSZ) solid electrolyte pellet at temperatures between 350 and 450 degrees C at 20 kPa O-2 and atmospheric pressure. ...
Nickel oxide and yttria doped zirconia composite strength is crucial for anode-supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This ...
Strong coupling among external voltage, electrochemical potentials, concentrations of electronic and ionic species, and strains is a ubiquitous feature of solid statemixed ionic-electronic conductors (MIECs), the materials of choice in devices ranging from ...
Ni-YSZ anode supports were used to fabricate test cells composed of yttria-stabilised zirconia (YSZ) electrolyte and lanthanum strontium ferrite (LSF) or lanthanum strontium manganite (LSM) / YSZ cathodes. These cells were operated at 720 °C at an average ...
This work aimed to set new guidelines for the quantification of Cr accumulation in solid oxide fuel cell cathodes after operation, and enabled to pinpoint a diffusion-controlled tolerance to Cr-poisoning for increased cathode thickness; the additional cath ...
The present study was initiated with the aim to assess the in vivo electrochemical corrosion behaviour of CoCrMo biomedical alloys in human synovial fluids in an attempt to identify possible patient or pathology specific effects. For this, electrochemical ...
The limited fossil fuel resources and the increasing levels of greenhouse gases in the atmosphere are the driving forces in the research of alternative ways of energy production and storage. The use of solar energy is expected to grow as our society claims ...
Miniaturized, low temperature Solid Oxide Fuel Cells (SOFCs) that operate below 600 °C are promising for supplying electrical power to portable devices. Thin electrolyte membranes of less than one micrometer thickness have been shown to yield reasonable po ...
The weakness of nickel-based solid oxide fuel cell anodes is their low ability to withstand re-oxidation at working temperature, especially for the anode-supported cell design. The volume expansion coming along with nickel (Ni) oxidation induces stresses i ...
The catalytic activity of deposited Pt-7 clusters has been studied as a function of the reduction state of the TiO2(110)-(1 x 1) support for the CO oxidation reaction. While a slightly reduced support gives rise to a high catalytic activity of the adpartic ...
