Publication

Comparison and Combination of Features in a Hybrid HMM/MLP and a HMM/GMM Speech Recognition System

Hervé Bourlard, Astrid Hagen
2004
Journal paper
Abstract

Recently, the advantages of the spectral parameters obtained by frequency filtering (FF) of the logarithmic filter-bank energies (logFBEs) have been reported. These parameters, which are frequency derivatives of the lofFBEs, lie in the frequency domain, and have shown good recognition performance with repect to the conventional MFCCs for HMM systems. In this paper, the FF features are first compared with the MFCCs and the Rasta-PLP features using both a hybrid HMM/MLP and a usual HMM/GMM recognition system, for both clean and noisy speech. Taking advantage of the ability of the hybrid system to deal with correlated features, the inclusion of both the frequency second-derivatives and the raw logFBes as additional features is proposed and tested. Moreover, the robustness of these features in noisy conditions is enhanced by combining the FF technique with the Rasta temporal filtering approach. Finally, a study of the FF features in the framework of multi-stram processing is presented. The best recognition results for both clean and noisy speech are obtained from the multi-stream combination of the J-Rasta-PLP features and the FF features.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (29)
Cutoff frequency
In physics and electrical engineering, a cutoff frequency, corner frequency, or break frequency is a boundary in a system's frequency response at which energy flowing through the system begins to be reduced (attenuated or reflected) rather than passing through. Typically in electronic systems such as filters and communication channels, cutoff frequency applies to an edge in a lowpass, highpass, bandpass, or band-stop characteristic – a frequency characterizing a boundary between a passband and a stopband.
Electronic filter
Electronic filters are a type of signal processing filter in the form of electrical circuits. This article covers those filters consisting of lumped electronic components, as opposed to distributed-element filters. That is, using components and interconnections that, in analysis, can be considered to exist at a single point. These components can be in discrete packages or part of an integrated circuit. Electronic filters remove unwanted frequency components from the applied signal, enhance wanted ones, or both.
Analogue filter
Analogue filters are a basic building block of signal processing much used in electronics. Amongst their many applications are the separation of an audio signal before application to bass, mid-range, and tweeter loudspeakers; the combining and later separation of multiple telephone conversations onto a single channel; the selection of a chosen radio station in a radio receiver and rejection of others.
Show more
Related publications (36)

Unsupervised Voice Activity Detection by Modeling Source and System Information using Zero Frequency Filtering

Mathew Magimai Doss, Eklavya Sarkar

Voice activity detection (VAD) is an important pre-processing step for speech technology applications. The task consists of deriving segment boundaries of audio signals which contain voicing information. In recent years, it has been shown that voice source ...
2022

Applicability of the landscape evolution model in the absence of rills

David Andrew Barry, Andrea Rinaldo, Paolo Perona, Seifeddine Jomaa, Mohsen Cheraghi, Andrea Cimatoribus

Despite numerous applications of physically-based models for incised landscapes, their applicability for overland flow on unchanneled surfaces is not known. This work challenges a widely used landscape evolution model for the case of non-uniform rainfall a ...
2022

XBAR resonators in 128° Y-cut Lithium Niobate LiNbO3

Manal Zeddoug

The increasing demand of higher frequencies technologies in RF (Radio frequency) components, especially for telecommunication, create a need to develop wider and higher frequency bands filters, with optimal performances. Thus, constant effort are made to d ...
2021
Show more
Related MOOCs (6)
Digital Signal Processing I
Basic signal processing concepts, Fourier analysis and filters. This module can be used as a starting point or a basic refresher in elementary DSP
Digital Signal Processing II
Adaptive signal processing, A/D and D/A. This module provides the basic tools for adaptive filtering and a solid mathematical framework for sampling and quantization
Digital Signal Processing III
Advanced topics: this module covers real-time audio processing (with examples on a hardware board), image processing and communication system design.
Show more