Non-isothermal process rheology of thermoplastic composites for compression flow moulding
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...
Damage recovery after low-velocity impact has been assessed in woven E-glass fibre-reinforced polymer composites with an epoxy matrix and a blend of epoxy and 25 vol% of poly(e-caprolactone) (PCL). Impact was carried out at three energy levels (8.5, 17, 34 ...
Blends of difunctional epoxy monomer with a 4,4'-diaminodiphenylsulfone hardener and poly(epsilon-caprolactone) (PCL) were used as a self-healing matrix in woven glass fibre-reinforced polymer composites (FRPs). FRPs with these blends (containing 0, 25 and ...
There is a growing interest in exploring novel material combinations and processing technology to manufacture complex 3D shaped polymer and composite structures. In the field of prosthetics and orthotics, this need is significant with additional challenges ...
Thermoplastic polymer composites (TPC) with multiple fabric layers of continuous fiber reinforcement are laminate sheets designed to be thermally stamped and overmolded leading to low cycle times and thus high volume composite parts. Injection over-molding ...
Structures made of FRP composites have been shown to provide efficient and economical applications in bridges and piers. They are being increasingly used due to their several advantages when compared to traditional materials, namely, the lightness, strengt ...
From the experimental analysis of the photocuring process in terms of reaction kinetics as well as modulus and shrinkage build-up, the residual stresses arising during the photopolymerization of functionally graded composite coatings based on an acrylate m ...
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
Pultruded glass fibre reinforced polymer (GFRP) profiles are finding increasing applications in civil engineering structures, owing to the several advantages they offer over traditional materials. However, due to the combustible nature of their polymer mat ...
The mechanical and damping properties of unidirectional (UD) and twill 2/2 flax fibre (FF) reinforced thermoset (epoxy) and thermoplastic (polypropylene (PP) and polylactic acid (PLA)) composites containing 40 vol% of fibres have been compared with those o ...
