Warp-knit laminates for stampable sandwich preforms
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Sandwiches based on stampable foam core and face sheets offer potential for cost-effective applications. Since the formability of such sandwich structures mainly depends on the drapability of the face sheets, the deformation behaviour of several types of t ...
A systematic study of the effects of charge composition and process parameters is presented for a prototype automotive part (a door cassette) produced by compression moulding from glass fibre and polypropylene composites. This follows previous studies (Par ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
This paper focuses on the constitutive behavior of the F82H ferritic/martensitic steels internationally investigated in the frame of the fusion material development program. Tensile tests were carried out in the temperature range (80-723 K) at different st ...
The reinforcement potential of pulp fibres is presently not fully explored in thermoplastic composites. One of the reasons is that currently used processing methods comprise several severe thermomechanical steps inducing premature degradation of the fibres ...
The mode I inter-laminar fracture toughness of advanced knitted textile composites was investigated. Two complex weft-knitted glass fabrics were selected for the study: a triple rib knit and a Milano knit were impregnated with a tough epoxy resin and teste ...
Ultra-High Performance Fibre-Reinforced Concretes (UHPFRC) have high mechanical strengths (fU,c > 150 MPa, fU,t > 6 MPa) and exhibit quasi-strain hardening in tension. Their very low permeability prevents the ingress of detrimental substances. In composite ...
Infiltration by a pure matrix in the presence of preform deformation and partial matrix solidification is analyzed using a bounding approach for the preform rheology where solid metal is present. It is found, using parameters for the infiltration of short ...
