Microdeformation mechanisms in thin films of amorphous semi-aromatic polyamides
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Hot cracking is a spontaneous failure of an alloy during solidification. It is a severe problem for casting industry as it reduces the productivity of cast houses and limits the range of alloys compositions that can be industrially produced. Hot tears occu ...
At early age, ultra high performance fibre reinforced concretes (UHPFRC)undergo significant volumes changes (thermal deformation and autogenous shrinkage)related to their composition. These deformations can be restrained by different elements respective to ...
Polymethylmethacrylate (PMMA) is used in many applications requiring good optical properties, resistance to ageing and resistance to UV irradiation, in spite of its relatively poor mechanical response to impact loading. In order to extend the range of appl ...
The purpose of this thesis is to characterize internal strains in polymeric materials due to consolidation. In view of this, optical Fiber Bragg Grating sensors are an excellent non-destructive tool for internal strain characterization and damage detection ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
Irradiation is known to lead to a degradation of the mechanical properties of materials. This is particularly crucial in the case of materials that will be used in the future thermonuclear fusion reactor, where extremely high irradiation doses are expected ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
The strain-hardening behaviour of a tempered martensitic iron-chromium-carbon model was examined in terms of dislocation mechanics. Tensile tests of this body-centered cubic alloy were carried out from 77 up to 293 K. A specific relationship between the fl ...
