Manufacturing cost comparison of thermoplastic and thermoset RTM for an automotive floor pan
Related publications (32)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
Homogeneous plane strain compression tests were performed on standard industrial GMT composites using a channel mould at 200oC. A charring and weighting technique was used to determine the fibre concentration after the compression experiments. Experimental ...
Aliphatic polyesters receive increasing attention over the last years driven by their application as biodegradable substitutes for conventional commodity thermoplastics and applications in the biomedical field, where amongst the family of biodegradable pol ...
This work addresses the development of composite materials that contain metallic load-bearing cords with the aim of combining outstanding mechanical performance with added functionality, including electrical conductivity, data transmission, and temperature ...
An experimental method based on a falling pressure measurement is proposed to evaluate the through thickness air permeability of prepregs during cure, with two set-up variants. One concerns the measurement of the inherent air permeability and the other app ...
The feasibility of using a low temperature liquid composite molding technique to produce smart composites with embedded shape memory alloys was investigated. The epoxy system of EPON 828 resin and DETA hardener was evaluated, with embedded NiTiCu shape mem ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of a unidirectional carbon fibre composite material was investigated using embedded optical fibre Bragg gratings. Four flat moulds (i.e. aluminium, steel, carbon ...
Two forms of carbon fibre reinforced polyamide 12 (PA12) were compared during non-isothermal stamp forming. The first was a stretch broken commingled yarn woven into a fabric, studied at three initial preconsolidation levels. The second was produced by in ...
As the range of applications for fiber-reinforced polymer (FRP) composite materials in civil engineering constantly increases, there is more and more concern with regard to their performance in critical environments. The fire behavior of composite material ...
A technique is presented to measure the capillary pressure drop DPg during infiltration of non-crimp fabrics by a liquid matrix. Three types of liquids are used: polyethylene glycol (PEG) dissolved in water, a thermoset epoxy resin and a reactive thermopla ...