Publication

Stamp forming of carbon fibre/PA12 composites - a comparison of a reactive impregnation process and a commingled yarn system

Related publications (40)

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Liquid composite moulding methods are widely applied for manufacturing of fibre reinforced polymer (FRP) composites and consist of two main stages: impregnation of fibrous reinforcements by a liquid monomer resin and curing of this resin. This thesis work ...

EPFL2023

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

Véronique Michaud, Vincent Werlen, Christian Rytka

Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection mouldin ...

SAGE PUBLICATIONS LTD2022

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Christian Rytka, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Jacobus Gerardus Rudolph Staal, Baris Çaglar, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Sustainable polyesters via direct functionalization of lignocellulosic sugars

François Maréchal, Véronique Michaud, Yves Leterrier, Harm-Anton Klok, Jeremy Luterbacher, Maxime Alexandre Clément Hedou, Adrien Julien Demongeot, Graham Reid Dick, Christèle Rayroud, Thibault Rambert

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the ...

2022

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultura ...

2021

Recycled Glass Fiber Composites from Wind Turbine Waste for 3D Printing Feedstock: Effects of Fiber Content and Interface on Mechanical Performance

Rodolphe Henri, Kazem Fayazbakhsh

This research validates the viability of a recycling and reusing process for end-of-life glass fiber reinforced wind turbine blades. Short glass fibers from scrap turbine blades are reclaimed and mixed with polylactic acid (PLA) through a double extrusion ...

2019

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

Functional composites with damage control and repair

Amaël Maximilien Cohades

Fibre Reinforced Polymer (FRP) composite structures are subjected during service to low energy impacts or unexpected loads, leading to damage. Microcracks are generally first formed in the matrix and can reach up to several hundred microns in thickness. In ...

EPFL2018

Hybrid Processing of Thermoplastic Based Multimaterials

Rajasundar Chandran

There is a growing interest in exploring novel material combinations and processing technology to manufacture complex 3D shaped polymer and composite structures. In the field of prosthetics and orthotics, this need is significant with additional challenges ...

EPFL2017

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.