Use of Transmission Electron-Microscopy for the Characterization of Rapid Thermally Annealed, Solution-Gel, Lead-Zirconate-Titanate Films
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We have studied deposition by in-situ reactive sputtering of ferroelectric Pb(ZrxTi1-x)O3 (PZT) thin films on Pt and RuO2 electrodes, using temperatures in the 490-620°C range. Nucleation on the electrode was found to be of prime importance for the formati ...
Pyroelectric thin film 12-element linear arrays (element size 0.4x0.9 mm(2)) have been fabricated by standard photolithography techniques on silicon substrates. A voltage responsivity of almost 800 V/W in air and 3000 V/W in vacuum is measured at low frequ ...
The scenarios of the size effects which may account for the difference in the switching properties of ferroelectric thin films and bulk ferroelectrics are critically reviewed. It is shown that the two often used models (the Janovec-Kay-Dunn surface nucleat ...
Pb(Zr1–xTix)O3 thin films (x = 0.55 and 0.85) were prepared on fine grained, polished ZrO2 ceramic substrates by a sol-gel method. The high thermal expansion of ZrO2 relative to Si allows the preparation of thicker PZT films with reduced thermal stress. Fo ...
Pb(Zr,Ti)03 thin films with compositions close to the morphotropic phase boundary deposited onto electroded Si substrates have potential for use in ferroelectric memories, sensors and micromechanical devices. The microstructures of such films prepared by i ...
In the present study, piezoelectric, conductivity and dielectric measurements have been performed on virgin and fatigued ferroelectric PZT thin films prepared by spin-on sol-gel deposition process on Si/SiO2/Ti/Pt substrates. By fatiguing, the polarisation ...
We fabricated and characterized a micromotor driven by a piezoelectric PZT (PbZrxTi1-xO3) thin films. Sputter and sol-gel techniques have been applied for the deposition of the PZT films onto a silicon stator membrane, which was 20 to 30 µm thick and had a ...
Piezoelectric membranes consisting of sputter deposited PbZrXTi1-XO3 (PZT) films on silicon diaphragms have been investigated for their resonance and piezoelectrical properties, in view of their application as stator of a micromotor. The behavior of resona ...
The mechanical response of piezoelectric cantilever beams actuated by sol-gel- derived lead zirconium titanate (PZT) thin film is reported. Small multilayered beams are used to analyse the converse piezoelectric effect and to measure the mechanical deflect ...
The influence of ultraviolet (UV) illumination on piezoelectric properties is investigated in lead zirconate titanate (PZT) thin films. It is found that the poling procedure is more effective when the film is exposed to a broadband UV light in the presence ...