Dependence of the direct piezoelectric effect in coarse and fine grain barium titanate ceramics on dynamic and static pressure
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Micro- and nanoelectromechanical systems (MEMS/NEMS) have long shown their potential to disrupt the established technologies. Over the past 15 years, MEMS have become fundamental components in filters, accelerometers, gyroscopes and gas sensors. MEMS are n ...
Occurrence of cavitation in hydraulic machines is a challenging issue because it is often accompanied with loss of efficiency, noise emissions, vibrations, and erosion damages. Tip vortices, in particular, are an ideal site for the development of cavitatio ...
In technical systems, static pressure and pressure changes are usually measured with piezoelectric materials or solid membranes. In this paper, we suggest a new biomimetic principle based on thin air layers that can be used to measure underwater pressure c ...
[001]-Oriented barium titanate (BaTiO3) ceramics were prepared by templated grain growth using [001]-oriented plate-like template BaTiO3 particles, synthesized via the molten salt method. Platelets synthesized in a 2-step or 3-step molten salt were used in ...
The high Curie temperature (T-C similar to 825 degrees C) of BiFeO3 has made this material potentially attractive for the development of high-T-C piezoelectric ceramics. Despite significant advances in the search of new BiFeO3-based compositions, the piezo ...
Beyond the possibility of finding a lead-free piezoceramics as replacement for PZT, the world-wide research has focused on other mechanisms of electro-mechanical coupling alternative to piezoelectricity, such as electrostriction and, more recently, flexoel ...
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
EPFL2013
, , , ,
Small amounts of anion impurities (e.g. Cl), which are incorporated during the synthesis of ceramic powders, can affect the properties and microstructure of the final sintered ceramic. The effect of anion impurities is a little studied and poorly understoo ...
Elsevier Sci Ltd2014
, , ,
Orifice spillways might be affected by cavitation if the profile of the inlet structure includes a relevant curvature. At one of the world’s largest dams, such damages were observed on the profiled slab. To limit their progression, an adapted operation reg ...
Departement Magnetohydrodynamics, Institute of Fluid Dynamics2012
Two fundamental requirements of transparent conductive oxides are high conductivity and low optical absorptance, properties strongly dependent on the free-carrier concentration of the film. The free carrier concentration is usually-tuned by the addition of ...
