Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of Graph Search.
Novel, highly sensitive piezoelectric acoustic sensors based on partially unclamped Pb(Zr-x, Ti1-x)O-3 (PZT) coated cantilever and bridge have been fabricated by silicon micromachining. High sensitivity at low frequencies (5-100 Hz) has been achieved by patterning very narrow slits (3 to 5 mum) around the structures. A typical response of 100 mV Pa-1 and a noise equivalent pressure of 1.6 mPa Hz(1/2) at 20 Hz have been measured using a 10 pF charge amplifier. Stress compensation, dry etching and integration of high performance piezoelectric thin films were the key issues. PZT/Pt/SiO2 stacks have been patterned by reactive ion etching and stress compensation has been achieved by compensating the PZT film's tensile stress by adjusting the thickness of a thermal SiO2 layer. The integration of sol-gel PZT films with a transverse piezoelectric coefficient e(31,f) of -12.8 C m(-2) has been realized without any degradation of the properties. The microphones were successfully integrated into a miniature photoacoustic detector and tested for CO2 detection. Concentrations down to 330 ppm could be measured with significant signals.