Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
On-site distributed strain measurements using an original Brillouin analyser were performed on cables using standard tensile test bench and on critical installations in the Swiss telecom network. ...
At early age, ultra high performance fibre reinforced concretes (UHPFRC)undergo significant volumes changes (thermal deformation and autogenous shrinkage)related to their composition. These deformations can be restrained by different elements respective to ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Tensile properties have been investigated on the low activation F82H ferritic/martensitic steels for both unirradiated and irradiated material. The irradiations have been carried out with protons of medium energy (590 MeV) at the PIREX facility and doses f ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
We have reinforced alpha-Ti with different contents of TiC particles using the in situ technique and conventional casting. Compositional and microstructural characterization of the TiC/Ti composite material was made by XRD and SEMEDS. Tensile tests at RT, ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
A new criterion for the appearance of hot tears in metallic alloys is proposed. Based upon a mass balance performed over the liquid and solid phases, it accounts for the tensile deformation of the solid skeleton perpendicular to the growing dendrites and f ...
